User guide

142 Connecting SX663 to Your PC
Handset Manager
You can transmit the following items between your phone and
your PC, and can use Phonebook entries on your PC:
• Gallery files (pictures/sounds/video clips/Other Documents
data)
• Phonebook entries
• Short messages
• Schedule entries
Via USB Data Cable
1. Insert the CD-ROM into your PC’s CD-ROM drive.
The SX663 CD-ROM screen is displayed.
If the SX663 CD-ROM screen is not displayed, double-click
[Launcher.exe] in your CD-ROM.
2. Select Handset Manager from the on-screen
instructions of your CD-ROM, and start installation of
Handset Manager software following the
on-screen instructions of your CD-ROM.
• If you have not installed the USB driver, follow steps 2
and 3 on page 140.
3. Follow the on-screen instructions to complete
installation.
• During installation, the on-screen instructions ask you to
select an interface. Select the USB data cable as an
interface.
4. Connect your phone to your PC. Power on your phone
and attach the phone to the USB port of your PC using
the USB data cable (optional accessory).
5. Select [Yes] for Mass Storage mode.
For details on activating this mode, see “Mass Storage” on
page 138.
6. Launch Handset Manager from the relevant folder.
7. Follow the on-screen instructions of Handset Manager.