User guide

132 Settings
To Select a Network Automatically
Each time the power is turned on, your phone always tries to
connect to the preferred network.
If your phone is not connected to the network, you can perform
the following immediately to establish the preferred network
connection.
“Settings”
→ “Network Settings” tab → “Network
Settings” → “Select Network” → “Automatic”
To Select the Network Manually
“Settings”
→ “Network Settings” tab → “Network
Settings”
→ “Select Network” → “Manual”
1. Select the desired network.
To Edit the Preferred List
“Settings”
→ “Network Settings” tab → “Network
Settings”
→ “Select Network” → “Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position, “Add
to end” to insert at the end or “Delete” to delete.
To Add a New Network
“Settings”
→ “Network Settings” tab → “Network
Settings”
→ “Select Network” → “Add New Network”
If there are no entries, press B and go to step 2.
If there is an entry, press B and perform the following steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Enter either 2G (GSM) or 3G for the network type.
Showing the Network Information
“Settings”
→ “Network Settings” tab → “Network
Settings”
→ “Network Information”
Information about the operator is displayed.
Off Line Mode
When the Off Line Mode is set to “On”, the phone cuts off the
network connections and stops searching for available
networks to connect.
“Settings”
→ “Network Settings” tab → “Off Line
Mode”
1. Select “On” or “Off”.
(M 9-d-d-1-3)
(M 9-d-d-2)