Operating instructions

Extron • System 8/10 PLUS • User’s Manual
Introduction to System 8/10 PLUS
Specifications
1-4
Specifications
General
Power .....90 - 260 VAC, 50/60 Hz, SMPS
Power consumption .....20 watts
Dimensions .....17" W, 10.5" D, 5.1" H
Shipping Weight .....18 lbs
Operating Temperature .....0° C - 50° C
Storage Temperature .....-20° C - 70° C
MTBF (demonstrated) .....30,000 Hours
Approval .....UL Listed
Warranty .....2 years parts and labor
Wideband Video
Connectors .....BNC
Bandwidth, System 8 .....300 MHz (-3 dB)
Bandwidth, System 10 .....250 MHz (-3 dB)
Crosstalk at 10 MHz .....-35 dB (typical) (note 1)
Isolation at 10 MHz .....55 dB (typical) (note 2)
Return Loss at 10 MHz .....25 dB
Input Impedance .....75 Ω
Output Impedance .....75 Ω
Termination Impedance .....75 Ω
Gain .....0 dB
Composite/S-Video
Connectors .....BNC
Termination impedance .....75 Ω
Gain .....0 dB
Sync
Connectors .....BNC
Termination impedance .....510 Ω
Triple action switch delay .....0 - 7.5 seconds
Audio
Input Impedance .....High Z (>10k Ω , typical)
Input Voltage Level .....To 10 V p-p into 600 Ω
Output Impedance .....Low, capable of driving 600 Ω
Crosstalk .....-100 dB @ 1 kHz (note 1)
Signal-to-Noise Ratio .....>95 dB
Single Output Level .....Near zero to unity gain
Differential Output Level .....Near zero to +6 dB gain
Bandwidth .....20 Hz - 20 kHz
Connectors .....Phoenix® type with captive screws
_____ 1. The Crosstalk specification is the attenuation of all hostile signals relative to a
given input-output connection.
2. The Isolation specification is the attenuation of an input signal relative to an
unselected output when all inputs have the same signal applied simultaneously.