User Manual
ENGLISH
29
Transmission Setting (Continued)
5
Press a/b to move the cursor to
“PRESET”, and press ENTER.
6
Press a/b to move the cursor to
“TRANSMISSION SETTING”, and press
ENTER.
[2] Setting Channel
Four settings can be selected for the communication channel consisting of
Auto, A, B and C. When set to “AUTO”, available channels that can be
transmitted are set automatically. It is recommended to normally set the
communication channel to “AUTO”.
AUTO A B C
1
Press a/b to select “CHANNEL”, and
then press ENTER.
2
Press c/d to select “AUTO”, and then
press ENTER.
• The available settings change in the
order shown below each time c/d is
pressed.
AUTO A B C
•“ADJUSTING CHANNEL SETTING.” is
displayed on the screen and the
communication channel is set
automatically.
M
ENU
SLEEP T I
M
ER
V IDEO ADJUST
PRESET
CLOSED CAPT ION
V–CHIP BLOCK
SET UP
SELECT : ENTER: EXIT:
ENTER
MENU
BRIGHTNESS [ BR I GHT ]
M
TS
AUTO PO
W
ER OFF
RETURN
[STEREO]
[OFF ]
PICTURE FLIP
AV2 IN/OUT
BATTERY
CHARGE
[NOR
M
AL ]
[IN ]
PRESET
TRANSMISSION SETTING
SELECT : ENTER: EXIT:
ENTER
MENU
[ON ]
STATUS:A
[ A]
DISTANCE
RETURN
[ FAR]
STATUS:NEAR
TRANSMISSION SETTING
CHANNEL
SELECT :
ENTER: EXIT:
ENTER
MENU
Displayed in yellow
BATTERY CHARGE AND TRANSMISSION SETTING (Continued)
ADJUSTING CHANNEL SETTING.
CHVOL
POW
ER
ENTER
DISPLAY
MUTE
SLEEP PIC. FLIP
BRIGHT TV/VIDEO MENU
FLASH-
BACK
ENTER/
a/b/c/d
MENU
[ AUTO ]
DISTANCE
RETURN
[ FAR]
STATUS:NEAR
TRANSMISSION SETTING
CHANNEL
SELECT :
ENTER: EXIT:
ENTER
MENU
Note:
• If “CHANNEL” is set to “AUTO”, when switching on the power or when setting the
communication channel, a connection is automatically made to an empty channel A,
B, or C.
∗ As this is not the function to automatically switch channels to an empty channel
when the reception conditions deteriorate, try to switch manually to another
channel with better reception conditions in such a case.
• This unit uses the three communication channels A, B, and C for wireless
transmission of video and audio signals.
When microwave ovens, wireless LANs, or devices using Bluetooth transmission
technology that use the same 2.4GHz frequency band are operating in the vicinity,
they may cause interference possibly making reception impossible.
In this case, changing to another transmission channel may avoid this type of
interference.