Installation manual

ManualsBrandsSharp ManualsFood WarmerTINSEB520MRK0

$HARP

OPERATION MANUAL

MODELS

KB-6100N

FOLLOWED BY INDICATING COLOR: K = BLACK, W = WHITE, S = STAINLESS STEEL

KB-6100NS

ELECTRICALREQUIREMEHTS................................ 3

CUSTOMERASSISTAHCE...................................... 3

COHSUMERLiMiTEDWARRAHTY............................ 4

PRODUCTIHFORMATIO$CARD.............................. 4

IMPORTAHTSAFETYIHSTRUCTIONS........................ 5

IHFORMATIO$YOUHEEDTOKHOW......................... 6

PARTHAMES................................................... 7

WARMIHGDRAWERUSE................................... 8-9

CLEAHIHGAHDCARE........................................ 1O

BEFOREYOUCALLFORSERVICE.......................... 11

INSIGHT. PRO _

Summary of content (11 pages)

PAGE 1
$HARP OPERATION MANUAL MODELS KB-6100N FOLLOWED BY INDICATING COLOR: K = BLACK, W = WHITE, S = STAINLESS STEEL KB-6100NS ELECTRICAL REQUIREMEHTS ................................ 3 IHFORMATIO$YOUHEEDTO KHOW......................... 6 CUSTOMERASSISTAHCE ...................................... 3 PARTHAMES................................................... 7 COHSUMERLiMiTEDWARRAHTY............................ 4 WARMIHGDRAWERUSE................................... PRODUCTIHFORMATIO$CARD..........
PAGE 2
CUSTOMER To assist in reporting this appliance, suggest you record all the information please record below the model number listed and retain for future reference. MODELNUMBER located on the unit.
PAGE 3
CONSUIVI_R L|IVI|T_D WARRANTY SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original container, will be free from detective workmanship and materials, and agrees that it will, at its option, either repair the detect or replace the detective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
PAGE 4
iMPORTANT SAFETY iNSTRUCTiONS READ ALL INSTRUCTIONS BEFORE USING When using the appliance, basic safety precautions should be followed, including the following: To reduce the risk of burns, electric shock, Jire or il_]ury to persons." .10 Do not immerse This appliance must be properly grounded. See separate Installation Instructions for grounding instructions. .1.1 Keep cord away from heated .12 Do not climb or sit on the appliance.
PAGE 5
iNFORMATiON YOU ANTI-TIP NEED BLOCK TO KNOW REQUIRED To reduce the risk of tipping of the drawer, the Anti-Tip block must be properly installed. Refer to the Installation Instructions for placement. BURN • • HAZARD DO NOT touch any of the surfaces inside or outside the Warming Drawer during or immediately after use. After use, make sure these surfaces have had sufficient time to cool before touching them. Exercise caution when opening the drawer.
PAGE 6
PART WARMING NAMES DRAWER KB-6100N o Power Electronic Touch Contro|s Light ,8 8- Variab|e Humidity Control for moisture adjustment. Slides to open and close. Numbers next to the electronic touch controls illustration indicate pages on which there are feature descriptions and usage information.
PAGE 7
WARMING DRAWER ELECTRONIC * TOUCH USE CONTROLS Press POWER to turn the Warming Drawer on and off. Signal light will indicate when unit is on. TO SELECT DESIRED TEMPERATURE * DESIRED TiME ON MODE When the Warming Drawer is in Continuous On mode, it will remain on until turned off manually. To avoid a fire hazard or burns, exercise caution when operating the unit in Continuous On mode. Touch POWER to turn the unit off.
PAGE 8
WARMING VARIABLE The slide drawer. HUMiDiTY control CONTROL is located on the inside OPEN front CRISP USE * You may preheat empty serving dishes while preheating the drawer. It is not necessary to preheat the Warming Drawer when warming dishes or plates. * Place empty serving dishes on the high rack and food on the bottom of the drawer when holding hot cooked foods together while warming empty serving dishes. * Do not drag dishes or plates scratching the surface.
PAGE 9
CLEANING AND CARE TEMPERATURE & HUMiDiTY SETTING CHART CONTROL STAINLESS The exterior should be wiped often with a soft damp cloth and polished with a soft dry cloth to maintain its beauty. There is also a variety of products designed especially for cleaning and shining the stainless exterior of the drawer. We recommend that the cleaner be applied to a soft cloth and then carefully used on the stainless exterior rather than sprayed directly on it. Follow package directions carefully.
PAGE 10
BEFORE YOU CALl. FOR SERV|C_ Please check the following before calling for service. It may save you time and expense. PROBLEM POSSIBLE CAUSE Part or all of Warming Drawer does not operate, • Power cord of Warming Drawer is not completely connected to the electrical outlet. • Power outage, • Fuse blown/circuit • No power to the appliance. not heated. • Drawer controls improperly 3 Warming Drawer light does not work.
PAGE 11
SHARP Sharp ELECTRONICS Plaza, Mahwah, 1-800-BE-SHARP TINSEB520MRK0 CORPORATION New Jersey (237-4277) 07495-1163 ® RECYCLEDPAPER PRINTED IH USA