Operation Manual

3-17

Quick Setup

Step 4:

Turning On Your Handset

Open the handset and press F and hold for

approximately 2 seconds.

The standby screen appears in the main display.

Turning Off Your Handset

Press F and hold for approximately 2 seconds.

Step 5:

Setting the Date and Time

Set the date and time before using the handset. If date

and time are left unset, you cannot operate some

time-based functions correctly.

1 Open the handset.

2 Press B.

The main menu appears.

3 Press a, b, c or d to highlight “Settings”

and press

4 Press a or b to highlight “Date & Time” and

press

5 Press a or b to highlight “Set date/time” and

press

6 Enter the month, day, year and time using the

digit keys and press

If you enter the time in the 12-hour format,

press

P to switch between am and pm.

For information on key operations, refer to

“Parts and Controls” on page 4-22.

When turning on the handset, you may be

asked to enter a PIN (Personal Identification

Number) code. Enter it and press

B. For more

information, refer to “If You Upgrade Your

Handset” on page 3-21 and the brochures

supplied with the SIM card.

For more information on how to set date and

time, refer to “Setting the Date and Time” on

page 15-151.

You can also use

to edit the

date and time.

e_tm200_7fm.book Page 17 Tuesday, November 9, 2004 9:14 PM

Downloaded from www.Manualslib.com manuals search engine