Operation Manual

6-32

Basic Handset Operations

This section describes basic phone call functions.

Confirm that the handset is on.

Making a Call

1 Open the handset and enter a phone number

with the keypad.

2 Confirm the number and press D.

Start talking when the connection is established.

If you enter a wrong number

Press A [Clear] to delete one digit. Press A [Clear] and

hold for approximately 2 seconds to delete the last line.

The handset returns to standby mode when all lines are

deleted.

Ending a Call

Press F to end the call.

Answering a Call

1 The handset rings for an incoming call.

The handset vibrates when the vibration is set to

“Enable” or “Link to sound.” For information on the

vibration setting, refer to “Setting the Vibration” on

page 15-137.

2 Press D or C [Answer].

The call is connected and “ ” appears.

When the Any Key Answer Function

is Activated

To answer a call, press any key except F or A [Busy].

For information on “Any Key Answer,” refer to “Setting

Any Key Answer” on page 15-142.

When the hands free EARphone &

MIC is connected

To answer a call, press and hold the button of the

hands free EARphone & MIC for approximately 2

seconds.

Closing the handset also ends a call. For

information on the other operations when handset

is closed, refer to “Settings for Flipping the

Handset Closed” on page 15-146.

e_tm200_7fm.book Page 32 Tuesday, November 9, 2004 9:14 PM

Downloaded from www.Manualslib.com manuals search engine