Operation Manual

6-34
Basic Handset Operations
Useful Functions
Speed Dialling
Up to 9 phone numbers from the “Contacts list” memory
(Handset and SIM) can be assigned to speed dials. You
can call the numbers using the digit keys. For information
on the “Speed dial list,” refer to “Setting the Speed Dial
List” on page 9-65.
1 To dial a number using speed dial, press and
hold any of the digit keys (H to O and Q)
for approximately 2 seconds.
The phone number stored in the “Speed dial list” is
dialled.
Call Waiting
This service enables you to talk to a third party while you
are in the middle of another call. After activating this
service, a beep tone notifies you of the second call.
To activate this service, refer to “Activating the Call
Waiting Service” on page 15-143.
1 During a call, press C [Options].
The “Options” menu appears.
2 Press a or b to highlight “Hold & Answer” and
press B.
The second party is put on hold and you can talk to
the third party.
3 Press C [Options].
The “Options” menu appears.
4 Press a or b to highlight “Swap calls” and
press B.
You can switch between the two calls.
5 Press C [Options].
The “Options” menu appears.
6 Press a or b to highlight “Release call” and
press B.
The current call ends and return to the held call.
G cannot be used as speed dial because it is
already assigned to “Voice mail.”
The call waiting service may not be available
on all networks. Contact your service provider
for more information.
If you do not wish to answer the second call,
press
C [Options] and press
a
or
b
to
highlight “Busy,” then press
B in step 2.
e_tm200_7fm.book Page 34 Tuesday, November 9, 2004 9:14 PM
Downloaded from www.Manualslib.com manuals search engine