Operation Manual

7-41
Using the Camera
Selecting the Frame
You can select and set a frame from preset patterns or
saved pictures.
1 At the main menu, select in the following order:
“Camera” → “Create photo.”
2 Press C [Options].
The “Options” menu appears.
3 Press a or b to highlight “Add frame” and
press B.
4 Press a or b to highlight “Preset frames” or
“Off” and press B.
If you do not wish to add a frame, select “Off.”
5 Press a, b, c or d to select the frame you
wish to view and press B.
Using Continuous Shooting
Four pictures are taken in succession. Auto shooting and
manual shooting are available.
1 At the main menu, select in the following order:
“Camera” → “Create photo.”
2 Press C [Options].
The “Options” menu appears.
3 Press a or b to highlight “Continuous
shooting” and press B.
4 Press a or b to highlight “Auto shooting” or
“Manual shooting” and press B.
“Auto shooting”: Four pictures are taken in a row
by pressing
B.
“Manual shooting”:
Pictures are taken one by one
by pressing
B.
To cancel continuous shooting, select “Off” in this
step.
5 Press B to start continuous shooting.
When the continuous shooting is finished, the
pictures taken are saved automatically.
To end the function, press
A [Cancel].
You can only select a frame when the picture
size is set to “Small” or “Tiny.”
If you activate “Continuous shooting,” you
cannot set a frame.
You can only use the continuous shooting
function when the picture size is set to “Small”
or “Tiny.”
If you select a frame when taking pictures, you
cannot use the continuous shooting function.
e_tm200_7fm.book Page 41 Tuesday, November 9, 2004 9:14 PM
Downloaded from www.Manualslib.com manuals search engine