User guide

Getting Started

SoftBank 007SH

USB Charge

Connect handset to a PC via Micro USB Cable.

・Power on handset and PC first.

・

Enable USB battery charge .

・To use Fast transfer mode, install USB Cable driver on the

PC beforehand.

・Battery may not charge or charge slowly depending on PC

status/environment. Battery may not charge if SD Card is

not inserted.

Open Port Cover and connect Micro USB Cable to External

Connector Port

Connect Micro USB Cable to PC USB port

Indicator Lamp illuminates while charging.

・When finished, remove Micro USB Cable and close Port Cover.

Important USB Charge Usage Note

Handset may power on automatically when connected to a

PC via Micro USB Cable; avoid connection aboard aircraft or

in hospitals, etc. where handset use is prohibited.

Handset Power On/Off

Power On

Press and hold until SoftBank logo appears

After Power On Graphics, waterproofing/dustproofing

guidance appears.

Initial setup menu opens.

・If handset is set to skip setup menu at Power on, Standby

appears.