Operation Manual

108
■ Opening a table in use on the open table list
Each clerk can display all the tables that are currently opened by the clerk on the table list. You can
select a table out of the list for reorder and payment, and also bill separation and table transfer which
are described later.
NOTE
Supervisors can see all opened tables.
1. Touch the [TABLE LIST] key, the open table list will open.
2. Touch the target table line to select the table.
In case Type 1 method is assigned, the registration screen will appear to receive a reorder.
In case Type 2 method is assigned, touch the [ORDER] key to get a reorder. The registration
screen will appear.
Room number
Number of guests
Amount
Service time
Clerk code/name
Table number/check
number
Automatic code entry method
Depending on the programming, you can generate free table codes using the Automatic Table Code
Generation ([AutoTable#]) function.
1. Touch the [AutoTable#] key. A table code (10001-99999999; depending on the programming) will
be automatically generated and the corresponding table will be open.
NOTE
• The guest check number is fixed at “01.
• You can perform the transaction migration to a table using the Automatic Table Code Generation
function.
• You cannot use the Automatic Table Code Generation function during bill totalizing/bill transfer and bill
separating operation.
Guest name