Service manual

UX-310DE
FO-730DE/NX-530DE
2 – 5
1 Protect from echo No Yes 0
2 Forced 4800 BPS reception Yes No 0
3 Footer print Yes No 0
4 Length limitation of No limit Copy/send: 60cm 0
copy/send/receive Receive: 1.5m
5 CSI transmission No transmitted Transmitted 0
6 DIS receive acknowledgement Twice NSF: Once 0
during G3 transmission DIS: Twice
7 Non-modulated carrier for V29 Yes No 0
transmission modem
8 EOL detect timer 25 s 13 s 0
Modem speed V.29 V.27 ter
9600 7200 4800 2400
1 No. 1 0 0 0 0 0
2 No. 2 0 0 0 0 0
3 No. 3 0 1 1 0 0
4 No. 4 1 1 0 0 1
5 Sender’s information transmit No Yes 0
6 Reserved 0
7 Communication error treatment in No communication Communication error 0
RTN sending mode (reception) error
8 CNG transmission No Yes 0
CED tone signal interval 1000ms 750ms 500ms 75ms
1 No. 1 1 1 0 0 0
2 No. 2 1 0 1 0 0
3 MR coding No Yes 0
4 Reserved 0
5 Reserved 0
6 Reserved 0
7 Reserved 0
8 Reserved 0
1 Signal transmission level Binary input 0
2 No. = 16 8 4 2 1 1
3 12345 0
4 01011 1
5 1
6 Protocol monitor (error print) Printed at com. error Not printed 0
7 Protocol monitor Yes No 0
8 Line monitor Yes No 0
Digital line equalization setting 7.2km 0km
1 (Reception) No. 1 1 0 1
2 No. 2 1 0 1
3 Reserved 0
4 Reserved 0
Digital cable equalizer setting 7.2km 0km
5 (Reception for Caller ID) No. 5 1 0 0
6 No. 6 1 0 0
7 Error criterion 10 ~ 20 % 5 ~ 10 % 0
8 Anti junk fax check Yes No 0 OPTION
5. Soft switch description
• Soft switch
SW
NO.
DATA
NO.
ITEM
Switch setting and function
10
Remarks
Initial setting
SW
l
A1
SW
l
A2
SW
l
A3
SW
l
A5
SW
l
A4
DE