COMMUNICATION CENTER OPERATION MANUAL UX-CD600

Polling (Requesting a Fax Transmission)

114

Polling (Requesting a Fax Transmission)

Polling allows you to call another fax machine and have it send a document

(previously loaded in its feeder) to your machine without assistance from the

operator of the other machine.

Hint: Polling is useful when you want the receiving fax machine, not the

transmitting fax machine, to bear the cost of the call.

♦ If you pick up the handset (or press ) before dialing and “WHICH

LINE?” appears in the display, press to select line 1 or to select

line 2.

♦ If you do not pick up the handset (or press ) before dialing, the

machine will normally use line 2. The machine will only use line 1 if line 2 is

busy (or if line 2 is not connected or disabled).

SPEAKER

Dial the fax machine that you wish to poll using one of the following

methods:

• Enter the full number using the numeric keys.

• Pick up the handset (or press ) and dial the full number. Wait for the

fax answerback tone.

• Press or until the name (or number) of the other party appears in

the display.

Press .

• If you used the handset, replace it when POLLING appears in the display.

Reception will begin.

SPEAKER

COPY/HELP/POLL

all.book 114 ページ２００４年６月２２日　火曜日　午後１２時１分