COMMUNICATION CENTER OPERATION MANUAL UX-CD600

Loading Printing Paper

Fan the paper, and then tap the edge

against a flat surface to even the stack.

Make sure the stack edges are even.

Insert the stack of paper into the tray,

PRINT SIDE DOWN

• If paper remains in the tray, take it out and combine it into a single stack

with the new paper.

• Be sure to load the paper so that printing takes place on the print side of

the paper. Printing on the reverse side may result in poor print quality.

•

GENTLY LOAD PAPER INTO THE PAPER TRAY

•

DO NOT FORCE IT DOWN INTO THE FEED SLOT

Note: Do not use paper that has already been printed on, or paper that is curled.

Loading Printing Paper

You can load letter or legal size paper in the paper tray. Recommended paper

weight is 20-lb. Copy Bond. The maximum number of sheets is as follows:

Letter size:

Approx. 50 sheets (20-Ib. copier paper at room temperature;

maximum stack height should not be higher than the line on the

tray)

Legal size: 5 sheets

Note: If at any time the display shows the

message at right, check the printing paper. If the

tray is empty, add paper. If there is paper in the

tray, take it out and then reinsert it. When you are

finished, press

START/MEMORY

The stack

should not

be higher

than this line

ADD PAPER &

PRESS START KEY

all.book 28 ページ２００４年６月２２日　火曜日　午後１２時１分