Operation Manual

114 Connectivity
Network Settings
Selecting a Service Automatically
Each time the power is turned on, your phone selects a service
automatically.
“Connectivity”
→ “Network Settings” → “Select Service”
1. Select “Auto”.
Selecting a Service Manually
“Connectivity”
→ “Network Settings” → “Select Service”
1. Select “GSM”.
Selecting a Network Automatically
Each time the power is turned on, your phone always tries to connect
to the preferred network.
If your phone is not connected to the network, you can perform the
following immediately to establish the preferred network connection.
“Connectivity”
→ “Network Settings” → “Select Network”
→ “Automatic”
Setting the Network Manually
“Connectivity”
→ “Network Settings” → “Select Network”
→ “Manual”
1. Select the desired network.
Adding a New Network
“Connectivity”
→ “Network Settings” → “Select Network”
→ “Add New Network”
If there are no entries, press and go to step 2.
If there is an entry, press and perform the following steps.
1. Select “Add”.
2. Enter the country code (up to 3 digits).
3. Enter the network code (up to 3 digits).
4. Enter a new network name (up to 25 characters).
5. Select “Select network type”.
6. Select the desired network.
Editing the Preferred List
“Connectivity”
→ “Network Settings” → “Select Network”
→ “Set Preferred”
1. Select the name of the network you wish to edit.
2. Select “Insert” to insert over the selected position, “Add to
end” to insert at the end or “Delete” to delete.
Showing the Network Information
“Connectivity”
→ “Network Settings” → “Network
Information”
Information about the operator name, package and services are
displayed.
(M 10-3)
(M 10-3-3)