Operation Manual

118 Connecting 903SH to Your PC
Connecting 903SH to Your PC
You can use the following functions by connecting the 903SH to your
PC using an Infrared port, a USB port* or Bluetooth wireless
technology port:
• 3G/GSM modem
• Handset Manager for 903SH
* Requires an optional USB data cable XN-1DC30 for USB port
connection.
System Requirements
Operating System:
Windows

98*, Windows

Me, Windows

2000**,
Windows

XP***
* Windows

98 Second Edition
** Service Pack 4 or later
*** Service Pack 2 or later
Supported Software:
Microsoft

Outlook/Outlook Express
Interface:
Infrared port, USB port or Bluetooth wireless port
CD-ROM drive
3G/GSM Modem
You can use 903SH as a 3G/GSM modem to access the Internet from
your PC. Connect your phone to your PC via Bluetooth wireless
technology or USB interface. Software installation on your PC is
required. For details, see “Software Installation” on page 119.
Modem via the USB Cable
To use the modem function using a USB cable, use the cable
mentioned above and see the instructions accompanying the cable.
Modem via Bluetooth connection
To use the modem function via Bluetooth wireless technology
interface, see “Using the Bluetooth Wireless Function” on page 111
and turn the modem function on.
For details on software support, refer to the following site:
http://www.sharp-mobile.com
Note
• Modem communication is not possible while communicating with
the Handset Manager via Bluetooth wireless technology, Infrared
or USB interface.
• Your phone exhausts the battery when connected to a PC, even
when not communicating.