User`s manual

Appendix A Introduction
97
Appendix A Introduction
A.1 MUXpro 820 and 8216 Craft Port (DB-9 Connector)
MUXpro 820 and 8216’s Craft port use DB-9 connector, and pin descriptions for
the DB-9 lists are shown in the following table. They are RS232 / V.28 electric
signal interfaces.
Table A-1 Craft port pin assignment for MUXpro 820, 8216
Description DB9 pin (male) Source
Transmitted data 2 DTE
Received data 3 DCE
Signal ground 5 Common
A.2 MUXpro 820 and 8216 Alarm Port (DB-9 Connector)
Table A-2 Alarm port pin assignment for MUXpro 820, 8216
DB9
(female)
Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9
Signal RA
MAJ_A
RA
MAJ_B
RA
MIN_A
RA
MIN_B
RV
MAJ_A
RV
MAJ_B
RV
MIN_A
RV
MIN_B
A.3 MUXpro 820 and 8216 on Board Ethernet Port (RJ-45)
Table A-3 On-Board Ethernet port pin assignment for MUXpro 820, 8216
RJ-45 Pin 1 Pin 2 Pin 3 Pin 4 Pin 5 Pin 6 Pin 7 Pin 8 Pin 9
Signal
TPO+(
o)
TPO-(o
)
TPi+(i) N/C N/C TPi-(i) N/C N/C N/C