User`s manual

Chapter 1 Overview
12
Figure 1-2 Typical Applications for MUXpro Series device
The whole network can be managed from a single location, using an SNMP-based
network management station that is connected to one of the MUXpro units. To
avoid using link payload-carrying capacity, the management traffic can be carried
within the SDH overhead, using the DCC.
1.4.2 Applications for MUXpro with 2 transparent LAN ports
Figure 1-3 shows a typical application for a MUXpro unit equipped with 6 LAN
ports (4 LAN ports connected to the internal Ethernet switch and 2 additional
transparent LAN ports). The user can select the number of transparent LAN ports
that are actually used (enabled).
Note:
The DCC can only be used when the SDH network supports
access and enables transparent connection to the DCC at
the required locations.