User`s manual

Chapter 2 Installation
37
Chapter 2. Installation
2.1 Introduction
This Chapter provides installation, operational instructions for the MUXpro Series
Product and to ensure that the unit is working properly.
2.1.1 Unpacking
Make a preliminary inspection of the shipping container before unpacking,
evidence of damage should be noted and reported immediately to the nearest
Tainet representative.
Unpack the equipment as follows:
 Place the container with the top facing upwards.
 Unpack equipment carefully, check for completeness against the purchase
order.
 Inspect equipment for shipping damage, including bent or loose hardware, or
broken connectors.
 To prevent electrostatic discharge (ESD) damage, avoid touching the internal
components. Before plugging in any user interface module, please turn the
power off.
MUXpro's shipping package should include the following items:
 A MUXpro stand alone unit
 User Manual in CD type
 A power adapter and/or a power cord
 DB-9 Cable
 Kits for rack installation (MUXpro 820 is by order; MUXpro 8216 is included)