User`s manual

Chapter 2 Installation
43
 Connect the MUXpro to a low-resistance grounding system.
 Whenever feasible, use shielded cables.
2.1.4 Equipment Needed
The cables you need to connect to the MUXpro depend on the MUXpro application.
You can use standard cables or prepare the suitable cables yourself in
accordance with the information given in Appendix A .
Contact Tainet Technical Support Department if other interface cables are
necessary.
2.1.5 MUXpro Enclosure
This section presents a physical description of the MUXpro versions.
2.1.5.1 MUXpro 820 Front Panel Description
Figure 2-1 MUXpro 820 front panel
Figure 2-2 MUXpro 820 rear panel (AC)