Manualshelf

User`s manual

ManualsBrandsSharp ManualsVCRVC-488NS
61626364656667686970
Chapter 3 Configuration
53
Chapter 3.
Configuration
3.1 Scope
This chapter provides general operating instructions and preliminary configuration
instructions of WEB UI for MUXpro units.
3.2 Operating Instructions
3.2.1 Connect to Web UI via LAN Port
The factory default IP of MUXpro series is 192.168.0.1 with mask 255.255.0.0.
User can configure MUXpro with web interface via RJ-45 connector.
There are two Admin users with user ID admin and tainet. Default ID and
Password Table is shown below:
Table 3-1 Default ID and Password for MUXpro product family
Login ID Login Password
MUXpro 820 admin admin
tainet tainet
MUXpro 8216 admin admin
tainet tainet