User`s manual

Chapter 3 Configuration
64
3.7.1 Section
This web page allows user to set parameters of Section.
Figure 3-16 Section
Table 3-3 Description of Section function
Pull down menu Description
Optical No. User can choose which optical port that will be modified.
AdminStatus Enable or Disable the specified optical port.
DEG Threshold Select the BER value; the signal-degraded alarm will be
generated for the port if the value is exceeded.
EXC Threshold Select the BER value; the error rate degradation alarm
will be generated for the port if the value is exceeded.
Transmitted Trace
ID
Specify the path trace label.
(J0 Tx Path Trace)
Expected Trace ID Specify Expected the path trace label.
(J0 Expected Path Trace)
3.7.2 VC-4
This web page allows user to set parameters of VC-4／VC-3.
Figure 3-17 VC-4
Table 3-4 Description of VC-4 function
Pull down menu Description
Optical No. User can choose which optical port that will be