User`s manual

Chapter 3 Configuration
66
Figure 3-19 E1 Interface
Table 3-5 Description of E1 Interface function
Pull down menu Description
VC-12
Choose which E1（VC-12） that will be modified.
Port Name Use to enter a logical name for the E1 port.
Admin Status Use to enable/disable the flow of traffic through the
selected E1 port.
Rx Equalizer Determine the maximum attenuation of the receive
signal that can be compensated for by the port
received path, to obtain the BER performance required
by the standards.
DEG Threshold Select the BER value; the signal-degraded alarm will
be generated for the port if the value is exceeded.
EXC Threshold Select the BER value; the error rate degradation alarm
will be generated for the port if the value is exceeded.
Transmitted Trace ID Specify the path trace label.
(J2 Tx Path Trace)
Expected Trace ID Specify Expected the path trace label.
(J2 Expected Path Trace)
3.7.5 LAN Port
This web page allows user to set parameters of LAN Port.