User`s manual

Chapter 3 Configuration
67
Figure 3-20 LAN Port
Table 3-6 Description of LAN Port function
Pull down menu Description
LAN Choose which LAN Port that will be modified.
Port Name Use to enter a logical name for the LAN port.
Auto Negotiation Use to enable/disable the Auto Negotiation function of
LAN Port.
Auto-negotiation is used to select automatically the mode
providing the highest possible traffic handling capability
Admin Status Use to enable/disable the flow of traffic through the
selected LAN port.
Max capability
advertised
Specify the highest traffic handling capability to be
advertised during the auto-negotiation process. The
operating mode selected as a result of auto-negotiation
cannot exceed the advertised capability.
This parameter is displayed only when auto-negotiation
is enabled.
Flow control/back
Pressure
Select the usage of flow control (when operating in the
full duplex mode), or back pressure (when operating in
the half-duplex mode)
3.7.6 VCG Group
This web page allows user to set parameters of VCG group.