User`s manual

Chapter 3 Configuration
70
Figure 3-23 GFP Multiplexer
Table 3-9 Description of GFP Multiplexer function
Pull down menu Description
GFP Mux Name Use to assign a logical name to the GFP multiplexer.
Primary The virtually concatenated group that serves as the transport
group of the GFP multiplexer output.
VCG1~ VCG6 The number indicates the fraction of the total bandwidth
guaranteed to the corresponding group.
The total bandwidth available to the GFP multiplexer output is
the bandwidth configured for the primary virtually
concatenated group.
3.7.9 LAPS Group
This web page allows user to set parameters of LAPS group. These parameters
are relevant only when LAPS encapsulation is used for at least one virtually
concatenated group.
Figure 3-24 LAPS Group
Table 3-10 Description of LAPS Group function
Pull down menu Description
VCG Choose which VCG that will be modified.
Address（0~FF）
Select the HDLC address to be used by the LAPS