User`s manual

Chapter 3 Configuration
77
3.7.13.7 VLAN Tag Priority
This web page allows user to set the egress priority of the frames. The priority “3”
is the highest priority.
Figure 3-35 VLAN Tag Priority
3.7.13.8 Spanning Tree
This web page allows user to set the Spanning Tree Protocol parameters in
accordance with the specific requirements of the customer’s application. When the
STP Mode is set to Enable, it takes effect on LAN port 1 to 4 and the LAN port
status can be checked in this page.
Figure 3-36 Spanning Tree