Dieser Videorecorder ist mit hervorragenden Qualitätsmerkmalen ausgestattet, die es ihnen gestatten, sich bei der Heim-Unterhaltung von Anfang an zu entspannen und Programme Ihrer Wahn zu gefiebert. Vor Inbetriebnahme (ihres Videorecorder lesen Sie bitte diese Bedienungsanleitung aufmerksam durch. Bewahren Sie sie auch zum späteren Nachschlagen gut auf. INHALT 2 ZUR BEACHTUNG BEDIENUNGSELEMENTE UND [HRE FUNKTIONEN 20 « ANSCHLUSS- . 22 « EINSTELLEN DER UHR. . 22 « EINSTELLEN DES VIDEOKANALS .
Eine Kassette einlegen. Die Uhr einstellen. Codeset {89:30 -rom {1:45 py 3208 & Putschs vl e wer 5 29 steilen des programmierbaren =55 Dieser Videorecorder kann filz die Aufnahme von bis zu vier Programmen efn Jahr in Voraus eingestellt werden. Auch tagtägliche und entweichen Programme konnten eingestellt und aufgenommen werden. Den programmierbaren Tier mit der Fernbedienung wie folgt einstellen. Beispiel: Uhrzeit: 11:45, Mittwoch, 24. Dezember 1986 Programmnummer: 1 Startzeit: 19:30, Freitag, 16.
ZU EINZUBERUFENDE PUNKTE VOR HINZUZIEHEN DES KUNDENDIENSTES Einzuberufen Sie bitte die folgenden Punkte anhand der Fehlersuchtabelle, bevor Sie den Kundendienst rufen. Problem Mögliche Ursache « OPERATEUR funktioniert nicht. » Kassette 1581 sich nicht auswerten. » EIMER eingeschaltet. « Strom eingeschaltet, Videorecorder lauft jedoch nicht. « Eine Sicherheitsvorrichtung im Videorecorder wurde aktiviert.
This YCR has outstanding features which allow you to relax and enjoy the home entertainment programmed of your choice. Before using the unit, please read the operation manual carefully. Be sure 1o store this manual for future use as it will come in handy f you encounter any problem with the unit. CONTENTS «PRECAUTIONS PART NAMES AND FUNCTIONS . 4 5 *SETTING THE CLOCK 8 « ADJUSTING THE VIDEO CHANNEL CHANNEL CONTROL FUNCTIONS . 7 «PLAYBACK .. 9 *RECORDING . 10 *SIMPLE RECORDING TIME (SRT) .
1, Super Auto Functions Simply Insert & cassette. You can enjoy a variety of convenient auto functions. 2. Auto Return Function Automatically rewinds a dimer recorded programmer to fts start for immediate playback. 3. Perpetual calendar — one year, four programmer timer with daily/weekly programming capability 4. Remote Controlled Timer Programming @ . 107 station memory frequency synthesizer tuner 6. Sonic signal (Beeper} An auditory operation indicator 7.
and Handling 1. Air vents are provided in the VGR cabinet to prevent excessive 4. Do not insert or drop anything anti the VCR through the air temperatures inside the unit. Do not place your VCR in closed vents or cassette holder as circuits could hart, the VCR could spaces, cover it, or otherwise block the vents, ba damaged, or fire may result. 2. Do not place the VCR in direct sunlight, near heat ventilators, 5. Do not place any object combining water or other liquids on or other heat sources. the VCR.
PART NAMES AND FUNCTIONS In_msw BH:B8¢ RNA Operation mode indicator Stop Stop Pause Fast Flay Forward Forward Rewind Video Search Reverse . Video Still Search Record Cassette holder Photo receptor window for remote control unit AUTO FUNCTION indicators Indicates the selected AUTO FUNCTION mode. Refer 10 “*PLAYBACK™ page 9. Display © Indicates display modes @ Displays clock or starting time. @® Counter memory indicator @ illuminates when presetting the VPS.
o when-setting 00 o0 CHANNEL select buttons timer. Simple Recording Timer [Z )@ buttons Hefner to “SIMPLE RECORDING TIMER” page 10. COUNTER MEMORY button Press totes the memory. The VCR will stop at when rewinding and reverse video search, COUNTER RESET button Display mode select button @ @ RF converter out channel adjuster DISGUSTING EVIDENCE CHANNEL "gaps 7.~ RAF OUT terminal Use the connector cable (provided) to connect to the antenna terminal of the TV. ANTENNA IN terminal Connect the antenna cabs here.
CONNECTION + The power cord should be plugged in only after all other connections have been made. » Please use a booster when signals are weak. TV receiver o ANTENNA IN (Supplied cable} SETTING THE CLOCK When ihe power cord Is plugged in, the display flashes, Year Set the clock with the Remote Control as follows. Minute Month €@ Press CLOCK. | @ Use the numeric keys to input the hour, minute, day, oae i ] 1 month and year, in that sequence. T e T «The flashing cursor indicates the digit to be input.
Video playback requires selection and sifting of a special “video” channel This video channel must be adjusted to the RF converter output channel (factory preset to UHF channel 36}, Select the idea channel on the TV, {Normally an unused saccharine) € Sei the TEST SIG switch CHARTER] Adjust the TV channel so the test pattern is clear. ® If a clear test pattern cannot be received, UHF channel 36 or a neighboring channel may be an active, broadcasting channel.
CHANNEL CONTROL FUNCTIONS (CONTINUED) Up to 99 channels can be preset. @ Specify the programmer channel number to be preset. (Reprogramming channel 1 €@ Press MEMORY OPEN OoN «This will set the VCR in the real channel Select the . presetting meed. Video channel * For storing 2 CATV channel in the memory, press the C/P button again and set the VCR in the CATV channel presetting mode. nut the real channel number to be molluscan memorized.
PLAYBACK [ oo satiation Super Auto Fun L] This unit features the following AUTO functions: *AUTO PLAY: Convenient for playing back prerecorded dives cassettes, Simply insert a video cassette. The VCR will automatically perform all operations including Power On and Off. * AUTO REPEAT: T Enjoy continuous playback. The VGR will repeat playback until STOP is pressed.
RECORDING ON Select the Video channel. SIMPLE RECORDING TIMER (SRT) Insert a cassette. Set the clack. PEC T N mme—i® CHANNEL a1 ~ Insert video cassette, The power automatically comes on. Select the channel to be recorded. = To record from an external source through the audiovisual terminals, select channel! D0 (AUX). Press REC to start recording. o Press PAUSE/STILL o temporarily stop recording. Press again to resume recording, e Press STOP to end recording.
o0t ez R ] Example: Present time: 11:45, Wednesday, December 24 Ending time: 12:30 Channel: 2 (Programmer channel) fl Specify the channel to be recorded. 00K LK. STRAY a4 3202 to arid to set the desired end* Each time the button is pressed, the ending time is advanced by 10 minutes. “Press ( /\ }to adjust minutes if necessary. Note * Press STOP to germinate recording. * Immediate recording is only possible in the stop and recording made.
PROGRAMMABLE TIMER Video Programmer System (VPS) Is an advanced system that allows you to record & timer-set programmer from the beginning lo the end Sven if there be a change in the actual broadcast dime. “The VPS signal broadcast from a TV the station controls the timer recording. « A spacial adapter {not supplied) will make the VPS recording possible. Even if the actual program time changes {eg.
Insert a cassette. ) Set the clock, R e This YCR can be programmed to record up to four programmed, one year in advance. Daily and weekly programmed can also be programmed and recorded. Set the Programmable Timer with the Re mots Control as follows, Example: Preset tire: 11:45, Wednesday, December 24, 1986, Programmer number: 1 Starting time: 19:30, Friday, January 16, 1987 Ending time: Channel: 2 a Press PRIG. to select the programmer nurturer, @ Enter the date (day, month) with the numeric keys.
PROGRAMMABLE TIMER (CONTINUED) Confirming and Clearing [Tt ves o Press PRIG. to select the desired programmer number and confirm the date. Press confirm the stetting time, ending time and channel. +The fishing cursor indicates where incorrectly entered data can be corrected. Press PRIG. CLEAR to erase the preset programmer. S »When setting and clearing the programmer, make sure that TIMER is off, « The VPS becomes automatically engaged when the Programmable Timer is set.
BEFORE CALLIGRAPHER — — Many problems do not require & serviceman. Refer 1o the table he law before calling for help. Problem Cause « OPERATE will not function, = Cannot sect the cassette. *TIMER is on. * Power on but VCR doss not run. » Safety device In VCR Is functioning. Unplug VCR and plug in again after about one minute, = Recording is not possible. «TV antenna is not properly connected. * Channels are not properly adjusted. » Turner recording is not possible. *Clock is not set.
SPECIFICATIONS Format: Video recording system: Video signal system: Recording/Playing time: Tape width: “Tape speed Antenna; Reception channels: RF output signal: Power requirement: Power consumption: Operating temperature: Storage temperature: Video input: output: horizontal resolution: Audio input: output: Dimensions: Weight: Supplied accessories: VHE PAL standard Two rotary head, helical scan PAL color or monochrome signals; 625 lines 240 min. with £-240 video ceaseless 127 mm 2330 mm/sec.