Specifications

!4a
Setting the Clock
When you use the VCR for the first time or after
a power failure of more than 60 seconds the
clock will be reset. Apply power to the unit to
switch it on and press the MENU button. Then
perform the following procedure.
Initial Setting of Clock
(VC-H660X) (VC-A260X, VC-A460X)
@ First set the language (Refer to page IO). Then press the SET button.
CHANGE :A V
Ex.; IQBAM
l If 12H mode was selected, then set the AM/PM
indicator
Ex.: Dec. 15 (15/12)
Changing
the Clock Setting
l If the clock has already been set previously and you want to change it, select “clock” from the MENU, and then
follow the procedures above.
_“..““.P”,“.
SET
0 Press the MENU button.
A
Select item “CLOCK” with the A/V buttons and
CHANNEL PRESET
;
press the SET button.
@ To return to the Normal Screen, press the SET
button.
11
_-_ -