Specifications

!!§I
Setting the Channels
Your VCR can receive VHF channels 0 to 12, and UHF channels 28 to 69. Your VCR has 48
programmable channel positions, each of which can be set to any of the above broadcast channels. The
channel positions have been preset at the factory as shown below.
----
Position
Preset TV Channel Position Preset TV Channel
INoTE>
--I_
-----. __--- --
_ _. __.
0
6 Sktpped channel
@Use the A / V I 4 I b buttons on the remote
1
Skipped channel 9 VHF 9
control to set the OSD.
-
l Channel posrtion numbers 1, 3, A, 8, 11 to 27, and
2
VHF 2
10
VHF 10
_-
29 to 46 have been factory set to be skipped when
3
Skipped channel 11-27
Skipped channel
the CHANNEL 0 or 0 button is used.
__-
4 Skipped channel 26
UHF 26
l If the picture is not clear, if you want a different
5
VHF 5A
channel from the one preset or if you wish to reset a
29-46
Skipped channels
skipped channel, reset the channel as follows.
6
VHF 6
7
VHF 7
47
AUTO TUNING
PREPARATION
*Select the video channel on your TV. Press the OPERATE button to turn on the VCR.
buttons, and press the SET button.
SELECT
*CHANNEL PRESET has
been preset to MANUAL at
IC TUNINO.
The bar display indicates the estimated amount
of channels tuned.
l If additional unwanted channels were found, refer to page 14 to skip unwanted channels.
l If some channels were unable to be found, please refer to page 13 for Manual Tuning.
12