Specifications

Recording with the Timer with G-CODE’
I
SET
0
SET
I)
aa-CODE
-
WEEKLY DAILY
(0)
0
MENU
Normal Screen
TIMER
ON/OFF
0
I)
TIMER
ON/OFF
(n)
@ Press the SET button.
To programme additional timer settings, press
the SET button and repeat steps @ through 0.
@ To return to the Normal Screen, pt!ess the MENU
button.
@ To set the VCR for automatic timer recording,
press the TIMER ON/OFF button and ensure the
“a” indication lights on the VCR display.
l Please be sure to check that the start and end times of two different programmes do not overlap, as the remote
control has been designed to accept the basic individual G-CODE number only. If the recording periods of two
programmes overlap, the beginning of the second programme will not be recorded.
l To cancel the programmed G-CODE setting, select the TIMER setting mode on the MENU screen. Then select the
programme number you wish to cancel with the A/I buttons and press the CLEAR button. (See Cancelling
Timer Programmes on page 29.)
Setting the Programme Number In Step 5
When using G-CODE for the first time the Programme number (PR) on the screen shows two dashes
and is highlighted white. Set it to be the same as the PR number to which your broadcasting channel is
set into.
For instance if you can view CH 47 on programme (PR) 47, set the On screen PR number to 47.
l You need to set this only once.
l If the channels are retuned you need to set the PR numbers again.
Input programme No. here.
l/3
START STOP
1a100~111,30~lSP
PR
r PREBET CR
BELLCT r4 b CHANOEtA v
SNTSR
ISXT
EXIT rMENU
26