Specifications

!§I
Setting the Language
PREPARATION
@Select the video channel on your TV. Press the OPERATE button to turn on the VCR.
When you use the VCR for the first time or after a power failure of more than 60 seconds the language
will be reset. Apply power to the unit to switch it on and press the MENU button. Then perform the fol-
lowing procedure.
[NOTE) 1’
l If the power has been disconnected, it will be necessary to set the language and clock again.
V CHANNEL A
0 0
(VC-H660X)
rim%-3)
You can use either the remote
buttons or buttons on the front
panel.
Buttons on the remote control
are in green;
A-UP
V - Down
4 - Left
b - Right.
Buttons on the front panel are;
A - Channel up
‘I - Channel down
4-REW b -FWD.
Initial Setting of Language
MENU
0
*
FRANGIIS
ESPAROL
92
SET
A
or b
0
V CHANNEL A
0 0
(VC-A460X)
V CHANNEL A
c
I
>
.._
(VC-A260X)
r
(VC-A260X, VC-A460X)
0
Press the MENU button.
Select the language with the A/V buttons and
press the SET button.
Ex. : EIUGL ISH
INoTE>
l Refer to page 11 to set the clock.
Changing Language
l If the language has already been set previously and you want to change it, follow the steps below.
MENU
0’
l4dNU
Q-CODE
TIMER
MODE
CHANNEL PRSSET
CLOCK
SELECT YA V
ENTER t SET
EXIT IUEND
SET
r)
0
SET
(0)
0
FRAN~AIS
ESPAWOL
len
SELSCT :A V
ENTER
#SIT
EXIT IMENU
SET
A
I)
0
SET
(0)
0
10
@ Press the MENU button.
Select item “LANGUAGE” with A/T buttons and
press the SET button.
@ Select the language with the A/V buttons and
press the SET button.
Ex. : ENGLISH