User Manual

ManualsBrandsSHARP ManualsVideo RecorderVC-FH30FPM

CONTENTS

BEFORE USING YOUR VCR

Important notes on your VCR ....................................................................................................... 2

Unpacking the accessories ........................................................................................................... 3

INSTALLING YOUR VCR

Connecting the cables ................................................................................................................. 4

Auto installation .............................................................................................................................. 5

BASIC OPERATION

Important notes on your VCR and video tapes .........................................................................8

How to playback a video tape ....................................................................................................8

Pausing and slow motion........................................................................................ 9

Fast forwarding/rewinding a video tape............................................................ 10

Immediate recording................................................................................................................... 11

Direct TV recording ...................................................................................................................... 12

How to use to make a recording ............................................................................. 13

How to set a delayed recording ................................................................................................15

Checking, changing and cancelling a recording ............................................ 17

ADVANCED OPERATION

Audio and your VCR .................................................................................................................... 18

Playback of a video tape ........................................................................................................... 20

Checking the amount of tape remaining .......................................................... 20

Playing back a video tape repeatedly .............................................................. 20

Playing back an S-VHS tape................................................................................. 21

Playing back an NTSC tape .................................................................................21

Remote control operation of TV ................................................................................................. 22

Digital Display................................................................................................................................ 23

Blue mute ...................................................................................................................................... 24

Colour ............................................................................................................................................24

SECAM ...........................................................................................................................................24

16:9 playback and recording .....................................................................................................24

Searching the video tape ........................................................................................................... 26

Digital programme search system (DPSS)........................................................... 26

Skip searching the video tape ............................................................................. 26

Recording from other equipment .............................................................................................. 27

SPECIAL FEATURES ON YOUR VCR

Child lock.......................................................................................................................................28

CUSTOMISED INSTALLATION

Manually tuning a channel ......................................................................................................... 29

Decoder switching operation.....................................................................................................30

Manually sorting channels........................................................................................................... 31

Sorting the channels into your preferred order.................................................. 31

Deleting channels.................................................................................................. 32

Re-naming channels ............................................................................................. 33

Changing the on-screen display language.............................................................................. 34

Manually setting the clock .......................................................................................................... 34

MORE INFORMATION ABOUT YOUR VCR

VCR digital display ....................................................................................................................... 35

Selecting the output from the VCR ............................................................................................ 35

Manufacturers codes for satellite receivers .............................................................................. 36

On-screen display......................................................................................................................... 37

Specifications................................................................................................................................ 38

Troubleshooting ............................................................................................................................ 39

Summary of content (40 pages)

PAGE 1
CONTENTS BEFORE USING YOUR VCR Important notes on your VCR ....................................................................................................... 2 Unpacking the accessories ........................................................................................................... 3 INSTALLING YOUR VCR Connecting the cables ................................................................................................................. 4 Auto installation ..................................
PAGE 2
BEFORE USING YOUR VCR IMPORTANT NOTES ON YOUR VCR IDEAL VCR LOCATION PLACE THE VCR.. • ... on a flat level surface away from radiators or other heat sources and out of direct sunlight. • ... and video tapes away from magnetic sources such as speakers or microwave ovens. • ... at least 8” (20cm) away from the TV. • ... away from curtains, carpets or other materials and allow ventilation space around the VCR. DO NOT... • ... block the air-vent openings. • ...
PAGE 3
BEFORE USING YOUR VCR UNPACKING THE ACCESSORIES CHECK ALL THESE ACCESSORIES ARE SUPPLIED WITH YOUR VCR. CONTACT YOUR DEALER IF ANY ARE MISSING. (TYPE AA/R6/UM3) BATTERIES (X2) REMOTE CONTROL for the remote control unit. COAXIAL CABLE For a more detailed picture of your remote control refer to page (ii). connects the VCR to the TV. SCART CABLE connects the VCR to the TV. To fit the batteries into the remote control Remove the battery cover on the back of the remote control.
PAGE 4
INSTALLING YOUR VCR CONNECTING THE CABLES AERIAL OR CATV CABLE 1 Connect your existing aerial cable to the ANTENNA IN socket on your VCR. 4 Connect the VCR to the mains ANTENNA IN ENTREE ANTENNE LINE2(II) IN /DECODER CANAL PLUS /L2(II) RF OUT SORTIE ANTENNE LINE1(I)IN /OUT SON/VIDEO (L1/I) Optional: Connect your Satellite receiver or decoder to the VCR using a scart lead to Connect your TV to the VCR using the supplied RF connection cable, i.e.
PAGE 5
INSTALLING YOUR VCR AUTO INSTALLATION SATELLITE RECEIVER / CABLE BOX CONTROL If you have a satellite receiver or cable box connected to your VCR you can automatically install the satellite channels using this feature. The installation procedure for cable boxes is the same as for satellite receivers (for cable box connections refer to your cable box manual). Follow steps 1-4 below before INSTALLATION PROCEDURE: 1. Connect your satellite receiver to the VCR as previously shown. 2.
PAGE 6
INSTALLING YOUR VCR AUTO INSTALLATION VCR RESET 1. Press STOP to switch on the VCR. 2. Press and hold MENU and buttons together on the front of the VCR for10 seconds. CHANNEL 5. 3. The AUTO INSTALLATION screen should SAT RECE I VER now be showing on your TV. Press SET to confirm. S A T CON T RO L ➔ I NPUT 4. Ensure your AERIAL/SCART cable is connected to your VCR and then press SET to confirm.
PAGE 7
INSTALLING YOUR VCR AUTO INSTALLATION 9. Press [ / ] to select SAT NO. Turn to the table at the end of this manual. Look for the make of your satellite receiver and use the NUMBER BUTTONS to enter the first code number listed. For example number 8 should be entered 0 0 8. Your satellite should now change to preset channel 12. 10. If your satellite receiver has changed to preset channel 12, press SET to confirm the VCR will automatically install both satellite and terrestrial channels.
PAGE 8
BASIC OPERATION IMPORTANT NOTES ON YOUR VCR AND VIDEO TAPES VIDEO TAPES • If you use only good quality video tapes, generally it will not be necessary to clean the video heads. • If poor quality tapes are used, or if a tape is loaded after changing VCR location, oxide from the tape may “clog” the video heads. This will cause the playback picture to be “snowy”, or even disappear. • To remove minor contamination run a video tape in visual search mode.
PAGE 9
BASIC OPERATION HOW TO PLAYBACK A VIDEO TAPE SHARP SUPER PICTURE should enhance the picture quality during playback. It is normally set to ON. To turn SHARP SUPER PICTURE on or off press SUPER P. on the VCR front panel. • For double speed playback (without sound), press PLAY/X2 ( • To revert to normal playback, press PLAY/X2 ( • To stop the video tape, press STOP ( • To eject the tape press ) again. ) again. ). EJECT on the VCR.
PAGE 10
BASIC OPERATION HOW TO PLAYBACK A VIDEO TAPE FAST FORWARDING/REWINDING A VIDEO TAPE 1. Press STOP ( ) to stop the video tape. 2. Press FAST FORWARD ( ) /REWIND ( ) on the remote control or rotate the shuttle dial clockwise for Fast Forward and counter clockwise for Rewind then release. 3. To stop fast forward/rewind, press STOP ( ).
PAGE 11
BASIC OPERATION IMMEDIATE RECORDING SELECTION OF A CHANNEL Select the channel by using the number buttons on the remote control, or select the next/previous channel by pressing CHANNEL [ or ]. To change between single digit and 2-digit channel numbers, press AM/PM For example, for channel 24, press AM/PM . then press 2 4. You can record the channel you are watching or a different channel. 1. Insert a video tape into your VCR. 2. Select the channel you wish to record on the VCR. 3.
PAGE 12
BASIC OPERATION DIRECT TV RECORDING This feature can only be used with nexTView, Smart Link, Easy Link and Megalogic compatible tv’s. By pressing the DIRECT TV REC button on the remote control, the VCR will record the signal currently being displayed on the TV regardless of the signal source. This feature can be started when the VCR is in STANDBY or OPERATE mode. • If • Ensure a video tape is inserted in the VCR. appears on the VCR display, press TIMER ON/OFF before starting. 1. 2. 3. 4.
PAGE 13
BASIC OPERATION HOW TO USE TO MAKE A RECORDING • If • Check that the clock is displaying the correct time. appears on the VCR display, press TIMER ON/OFF before starting. SHOWVIEW allows you to program the VCR to record up to eight programmes using the SHOWVIEW numbers published in TV listings... 1. Press SHOWVIEW on the remote control 2. Enter the SHOWVIEW number from the TV listing using the NUMBER BUTTONS. → S HOWV I EW NO .
PAGE 14
BASIC OPERATION HOW TO USE TO MAKE A RECORDING 7. If your VCR has long play facility and you wish to change the RECORDING SPEED, use the [ / ] to highlight SP. Press [ / ] to select standard play (SP) or long play (LP) as required. 8. Press SET to confirm the programme. the SHOWVIEW menu will reappear. If you wish to enter further SHOWVIEW recordings repeat this procedure.
PAGE 15
BASIC OPERATION HOW TO SET A DELAYED RECORDING You can make a maximum of eight delayed recordings up to a year in advance. The example shown is for 24-hour clock operation. 12-hour clock operation can be selected from the manual clock setting menu. 12-hour clock am/pm can be selected using the AM/PM • If • Check that the clock is displaying the correct time. button on the remote control. appears on the VCR display, press TIMER ON/OFF before starting.
PAGE 16
BASIC OPERATION HOW TO SET A DELAYED RECORDING 8. Enter the start time using the [ / ] or the NUMBER BUTTONS hours first then minutes (when entering less than 10 minutes add a '0' before the number), for example for 21:05 start, press 2 1 0 5. Then press SET to confirm. 9. Enter the stop time, for example for 22:30 stop, 1/2 DA T E P R S T AR T S T OP 21 / 06 02 12 : 00 13 : 00 - : - 9 / 0 7D0 3 2 1 : 0 5 - - / - - - - : - - : - - - / - - - - : - - : - - SP SP - - - press 2 2 3 0. 10.
PAGE 17
BASIC OPERATION HOW TO SET A DELAYED RECORDING CHECKING, CHANGING AND CANCELLING A RECORDING CHECKING A RECORDING MENU SCREEN 1. If in TIMER STANDBY mode, press TIMER ON/OFF to exit. T I ME R MOD E SE T UP 2. Press STOP to switch on the VCR. 3. Press MENU. 4. Press [ / ] to select TIMER. Press SET to confirm • All the delayed recordings in the VCR’s memory will be shown. • You can check the settings and change or cancel them. CHANGING A RECORDING 1. Follow steps 1 to 4 of CHECKING A RECORDING.
PAGE 18
ADVANCED OPERATION AUDIO AND YOUR VCR HI-FI STEREO SOUND Stereo sound is possible from this VCR if you have a stereo TV connected to the VCR with a scart lead, or audio equipment connected with audio phono leads. The VCR is normally set so that stereo sound is possible. The sound output from the VCR is controlled by the AUDIO OUT button on the remote control. If you wish to change the sound output you can use the AUDIO OUT button as follows: • • • • Press AUDIO OUT once.
PAGE 19
ADVANCED OPERATION AUDIO AND YOUR VCR CONNECTING TO AUDIO EQUIPMENT The diagram below shows how to connect your VCR to audio equipment. When connected in this way stereo sound is possible from the speakers.
PAGE 20
ADVANCED OPERATION PLAYBACK OF A VIDEO TAPE CHECKING THE AMOUNT OF TAPE REMAINING When you load a video tape into the VCR it can calculate approximately the amount of video tape remaining in hours and minutes. This is useful in determining whether or not there is sufficient tape left to make a recording. When a video tape is playing, the amount of tape remaining is calculated for you automatically. To display the amount of video tape remaining: 1. Load the video tape into the VCR 2.
PAGE 21
ADVANCED OPERATION PLAYBACK OF A VIDEO TAPE PLAYING BACK AN S-VHS TAPE S-VHS (super -VHS) pre-recorded tapes give you a better quality playback picture with increased detail and depth. Your VCR will automatically recognise which type of tape is being used, VHS or S-VHS and playback the appropriate standard accordingly. NOTE: • All of the VCR’s playback functions can be used during S-VHS playback, SLOW, PLAY/X2, VISUAL SEARCH, etc. • Your VCR is S-VHS playback only, it will not record S-VHS.
PAGE 22
ADVANCED OPERATION REMOTE CONTROL OPERATION OF TV In addition to operating the VCR the remote control will also operate basic functions on TV’s, including brands other than SHARP. SETTING UP THE VCR REMOTE CONTROL TO OPERATE THE TV 1. Switch on the TV, and point the VCR remote control towards it. 2. Press the TV button on the remote control to engage TV mode. 3. Hold down STANDBY on the VCR remote control then the appropriate button for the TV from the list shown for 2 seconds.
PAGE 23
ADVANCED OPERATION DIGITAL DISPLAY TIME OF DAY Shows current time of day, if the clock is set. Press DISPLAY until the time of day appears. For example, 21:20 appears: PR OPERATION MODE Shows status of tape. Press DISPLAY until the display appears, for example: PR TAPE COUNTER AND ZERO BACK Tape counter measures the current position of the video tape in real time. ZERO BACK uses the tape counter to determine a specific point on a tape you may wish to return to. 1.
PAGE 24
ADVANCED OPERATION BLUE MUTE The TV screen will be blue if a TV channel with no signal is selected, an unrecorded section of tape is played or the quality of the recording on the tape is poor. Select OFF to disable this feature. 1. Press MENU to display the main menu on the MODE MENU SCREEN screen. 2. Press [ / N I CAM AU T O OF F AU T O P A L S E CAM CLR S E CAM ME S E CAM S E CAM B L U E MU T E AU T O OF F R E P E T I T I ON ON OF F 16 : 9 AU T O OF F ] to select MODE. 3. Press SET. 4. Press [ 5.
PAGE 25
ADVANCED OPERATION Carte des systèmes de télévision Zone Norme de diffision PAL-B/G SECAM-B/G SECAM-L Possibilité d´énregistrement/lecture par systéme de diffusion lorsque le mode CLR est réglé sur AUTO.
PAGE 26
ADVANCED OPERATION SEARCHING THE VIDEO TAPE DIGITAL PROGRAMME SEARCH SYSTEM (DPSS) Your VCR records a marker signal on the tape at the start of each recording. These signals can be used later to locate the starting point of a recording. Press DPSS to locate a previous programme or the next programme. / For example, 1. Load the video tape into the VCR. 2. Press DPSS three times. A 3 will appear on the on-screen display, and the VCR will fast forward to locate the third recording after the current one. 3.
PAGE 27
ADVANCED OPERATION RECORDING FROM OTHER EQUIPMENT You can record video and audio signals from various sources, for example a camcorder, onto a video tape using your VCR. For example, recording from a camcorder connected to LINE 2 IN/DECODER on your VCR: Optional Scart connection (not supplied) ANTENNA IN ENTREE ANTENNE LINE2(II) IN /DECODER CANAL PLUS /L2(II) RF OUT SORTIE ANTENNE LINE1(I)IN /OUT SON/VIDEO (L1/I) Mono/Stereo Camcorder 1. LOAD TAPE INTO THE VCR. INPUT SELECT 7 2.
PAGE 28
SPECIAL FEATURES ON YOUR VCR CHILD LOCK You can lock your VCR with this feature. It will work even when the VCR is in standby, preventing children from operating the VCR. TO ENGAGE CHILD LOCK Press and hold on the remote control for about 2 seconds. flashes and then remains lit on the VCR display confirming that CHILD LOCK has been activated. Regardless of what other operating buttons are touched, the VCR will continue to operate in its present mode.
PAGE 29
CUSTOMISED INSTALLATION MANUALLY TUNING A CHANNEL It should not be necessary to tune in a broadcast channel manually except in unusual circumstances such as poor signal. To manually tune in a channel follow the procedure below. 1. Press MENU. 2. Press [ / ] to select SET UP. Press CHANN E L CHANN E L SET to confirm. 3. CHANNEL PRESET will be C L OCK L ANG UAG E highlighted. Press SET. 4. Press [ 5. Press [ / / PRE S E T S OR T ] to select CHANNEL. ] to start tuning in either direction.
PAGE 30
CUSTOMISED INSTALLATION BROADCAST AND CATV CHANNELS V H F U H F Numéro réel Signals CH:02 CH:03 CH:04 CH:05 CH:06 CH:07 CH:08 CH:09 CH:10 CH:11 CH:12 CH:21 CH:22 : : CH:68 CH:69 Numéro réel Signals Nom de la Station SECAM-L PAL B/G 2 3 4 5 6 7 8 9 10 ● ● 2 3 4 5 6 7 8 9 10 11 12 21 22 21 22 68 69 68 69 C A T V CC:01 CC:02 CC:03 CC:04 CC:05 CC:06 CC:07 CC:08 CC:09 CC:10 CC:11 CC:12 CC:13 CC:14 CC:15 CC:16 CC:17 CC:18 CC:19 CC:20 Nom de la Station SECAM-L PAL B/G B C D E F G H I J K L M N O P Q
PAGE 31
CUSTOMISED INSTALLATION MANUALLY SORTING CHANNELS SORTING THE CHANNELS INTO YOUR PREFERRED ORDER When your VCR tunes in broadcast channels automatically it sorts them into a standard order using teletext information. You can change the order of the channels with the following procedure. 1. Press MENU. 2. Press [ / 2. confirm. 3. Press [ MENU SCREEN ] to select SET UP. Press SET to MOD E T R I CANA L / ] to select CHANNEL SORT. Press SET to confirm. 4. The MOVE position will be highlighted.
PAGE 32
CUSTOMISED INSTALLATION MANUALLY SORTING CHANNELS DELETING CHANNELS If there is a channel you wish to delete from the VCR memory you can follow the procedure below. 1. Press MENU. 2. Press [ / 2. ] to select SET UP. Press SET to confirm. 3. Press [ / MENU SCREEN T I ME R MOD E T R I CANA L ] to select CHANNEL SORT. Press SET to confirm. 4. Press [ / ] to select CANCEL. Press SET to 5. confirm. 1 CH 2 1 2 CH 3 2 3 CH 4 3 4 CH 5 4 5 CH 6 5 6 5.
PAGE 33
CUSTOMISED INSTALLATION MANUALLY SORTING CHANNELS RE-NAMING CHANNELS When your VCR tunes in broadcast channels automatically, it names them using teletext information. You can change the name of a channel with the following procedure. 1. Press MENU. 2. : MENU SCREEN 2. Press [ / ] to select SET UP. Press SET to confirm. MOD E T R I CANA L 3. Press [ / ] to select CHANNEL SORT. Press SET to confirm. 4. Press [ 5. / ] to highlight NAME. Press SETto confirm.
PAGE 34
CUSTOMISED INSTALLATION CHANGING THE ON-SCREEN DISPLAY LANGUAGE Changing the language used by the on-screen display will not change the operation of the VCR or make it suitable for any other broadcast standard. 1. Press MENU. 2. Press [ / ] to select SET UP. If the display is not in a language you can understand, this is the fourth option from the top. Press SET to confirm.. 3. Press [ / ] to select LANGUAGE (the last option).
PAGE 35
MORE INFORMATION ABOUT YOUR VCR VCR DIGITAL DISPLAY 1 2 3 4 5 6 LR 7 AM PM 14 8 9 10 STOP SP LP 13 12 11 9. VIDEO PROGRAMMING 1. AUDIO OUTPUT indicators. SYSTEM/PROGRAMME DELIVERY CONTROL indicator. 2. TIMER indicator. 3. PLAY indicator. 10. DECODER indicator. 4. RECORDING indicator. 11. LONG PLAY indicator. 5. STOP indicator. 12. STANDARD PLAY indicator. 6. VCR TAPE indicator. 13. CHILD LOCK indicator. 7. PRESET indicator. 14. AM/PM indicators. 8. VCR mode indicator.
PAGE 36
MORE INFORMATION ABOUT YOUR VCR MANUFACTURERS CODES FOR SATELLITE RECEIVERS The following table is a list of satellite manufacturers’ code numbers. Your VCR will use one of these in order to recognise your satellite receiver. The code number must be entered at point 9. during installation with a satellite receiver. Look up your make of satellite receiver. Use the NUMBER BUTTONS to enter the first code number listed. For example number 8 should be entered 0 0 8. Continue from point 10. (AUTO INSTALLATION).
PAGE 37
MORE INFORMATION ABOUT YOUR VCR ON-SCREEN DISPLAY All the information you need on the VCR status will be summarised on the on-screen display. If you are recording, playing back a tape or watching a broadcast on the video channel you can call up three standard on-screen displays. The display can be selected by pressing the MODE OSD button on the remote control, 1,2,3 or 4 times. 1. AUTO, the current mode and channel 1. number will be displayed for 3 seconds when an operation or number button is pressed.
PAGE 38
MORE INFORMATION ABOUT YOUR VCR SPECIFICATIONS Format: Number of heads: Video signal system:: Hi-Fi audio recording system: Maximum playing time: Tape width: Tape speed: Antenna: Reception channels: RF output signal: Power requirement: Power consumption: Operating temperature: Storage temperature: Video input: Video output: Audio input: Audio output: Hi-Fi audio: Dimensions: Weight: Supplied accessories: VHS PAL standard/VHS SECAM-L 6 PAL/MESECAM colour or monochrome signal: 625 lines Deep layer recordi
PAGE 39
TROUBLESHOOTING TROUBLESHOOTING AREA INSTALLATION POWER PROBLEM TV will not tune in to the VCR. POSSIBLE CAUSE/CURE • Check all the cables are correctly connected. • Check your TV manual for correct tuning of your TV. • Reset the VCR and complete AUTO INSTALLATION again. (Refer to VCR Reset at the back of the book.) Auto Installation screen does not appear when the VCR is switched on OR Auto Installation is not complete. Display is not working. • Make sure the power cord is plugged in.
PAGE 40
TROUBLESHOOTING TROUBLESHOOTING AREA PROBLEM POSSIBLE CAUSE/CURE REMOTE The VCR can not be operated by remote control • Remote control is too far away from the main unit. • Point the remote control at the VCR. • Batteries are flat - replace both. • Batteries have not been inserted correctly. • VCR is positioned in strong light. • Adjust the position or angle of the satellite receiver. CONTROL SATELLITE OTHER PROBLEMS Satellite receiver does not respond to VCR commands.