Specifications

2. If a paper misfeed is detected by the registration sensor ON
check during a multi-copy run, the misfeed location indicator
turns on after copies that began the copy cycle before the paper
jam are completely feed out from the copier.
3. If an original misfeed occurs in the DF, the misfeed indicator "F"
blinks.
NOTE2: The A054 copier has an additional feed station: the lower paper
tray. When the lower paper tray is in use, the following apply:
1. The misfeed location "A" and "C" indicators will light if the
registration sensor turns ON during the check for an initial
misfeed.
2. The misfeed location "A" indicator will blink if the relay sensor
does not turn on during the copy cycle.
3. During the copy cycle, the misfeed location "C" indicator will blink
if the registration sensor does not turn on after the relay sensor
turns on.
4. The misfeed location "A" indicator will light if the relay sensor
detects a paper misfeed.
5. Jam flags "3" and "15" have been added for the 2nd paper tray
misfeed condition check.
1 December 1990
4-31