Specifications

1.2 INNER COVER REMOVAL
1.2.1 Right Inner Cover
1. Open and remove the front cover.
2. Remove the development unit.
3. Lower the turn guide lever [A].
4. Remove the registration knob [B] and paper guide release lever [C]
(1 screw each).
NOTE: When reinstalling the release lever [C], make sure that the pin [D] on
the lever is properly set in the paper guide.
5. Remove the right inner cover [E] (3 screws).
1.2.2 Left Inner Cover
1. Open and remove the front cover.
2. Remove the fusing roller knob [F].
3. Remove the left inner cover [G] (3 screws).
[G]
[E]
[A]
[D]
[C]
[B]
[F]
1 December 1990
5-4