Specifications

12. Connect the sorter dc harness [A] (10P/Brown) to the optional harness
connector [B]; then, connect the optional harness connector [C] to CN203
on the interface board [D].
13. Connect the dc harness [E] (3P/White) to CN103 on the main dc power
supply unit.
14. Secure the grounding wire [F] (1 screw and toothed washer) on the bot-
tom plate as shown.
15. Plug in the copier power supply cord.
16. Turn on DIP switch 101-4 on the main board and turn on the main switch.
Then, change the SP Mode #71 data to "1" (sorter instruction).
17. Turn off the main switch and DIP switch 101-4.
18. Replace all covers and turn on the main switch.
19. Check the operation of the sorter.
[E]
[A]
[B]
[F]
[D]
[C]
1 December 1990
9-15