| ALGEMENE INFORMATIE " BELANGRIJKE VEILIGHEIDSEN voorzorgsmaatregelen | Let op LEES DE GEBRUIKSAANWIJZING AANDACHTIG DOOR ALVORENS DE VIDEORECORDER IN GEBRUIK TE NEMEN. BEWAAR DE GEBRUIKSAANWIJZING VOOR HET GEVAL U IN DE TOEKOMST VERDERE INFORMATIE WENST BETREFFENDE DE BEDIENING VAN DE VIDEORECORDER. Opstelling en behandeling 1. In de behuizing van de videorecorder zijn ventiiatie-cpeningen aangebracht om overhelling te voorkomen. Paals het apparaat daarom niet in een dicht afgesnoten ruimte.
ALGEMENE | BEELDSCHERMDISPLAY | (MENU OSD) Alg de procedure hieronder na het maken van de basisinstellingen. 9 Schakel kies het videokanaal @ Druk op de (OPERATIE) om de videorecorder in te schakelen en druk vervolgens op de menulosts (MENU) om het menu in beeld te brengen. ® Kies het in te stellen onderdeel door de knipperende aanduiding te verplaatsen met de W (FF) of € (REW) toets of de numerieke toetsen (1 t/m &} van de afstandsbediening.
S Pr Met het drukken op de displaytoets (DISPLAY) zal de aanduiding in het display als volgt veranderen. [HUIDIGE TWD ] {BANDTELLER | [RESTERENDE BANDLENGTE] OPMERKING: * Tijdens het maken van een opname met de normale of directe opnametimer, zal de eindtijd var de opname in het di play worden aangegeven. Met het drukker op de displaytoets (DISPLAY) zal ge aanduiding in hat display ais volg veranderen, [ EINDTIJD VAN OPNAME | [HUIDIGE TUD _smm..
GEBRUIK VAN DE AFSTANDSBEDIENING VOOR DE TV | Jet d geleverde staatsbediening kunt u ook de basisfunkiies van uw TV whcuw.w Sharp Tv's kunt u tevens Tv's van andere merken bedienen d de onderstaande lijst staan vermeld. De afstandsbediening dient overeenkomstig merk van de TV te worden gestoeid. De basisinstelling van de afstandsbediening is “SHARP”, voor bediening van de meeste Sharp Tv's.
INSTALLATIE BE— | AANSLUITING OP EEN STEREO-TV | | AANSLUITING OP EEN TV EN AUDIO-INSTALLATIE Naar audioinganasaan (AUDIO ingangskaan: Versterker OPMERKINGEN: era-signalen kunnen alleen via de audio-uitgangsaansly lijnaansluiting 1 {AUDIO OUT of KINE 1) worden urd. Geluid van de 1oogfrekwentie-uitgangsaan ng (RF OUT) zal uitsluitend mono zijn, + De stekker mag pas in het stopkontaki worden gestoken nadat alle bovenstaande verbindingen {ot stand zijn gebracht.
| BASISINSTELLING VAN HET BEELDSCHERMDISPLAYMENU Als de videorecorder voor het gerst in gebruik wordt genomen, of als de stroomtoevoer _m»jflma dan een minuut 5 werd onderbroken, dan zat het beeldschermdisplay automatisch in de basisfunctie schakelen zodat het MENU en de taal en klok kan worden ingesteld. Volg de hierna aangegeven procedure voor het maken van de basisinstellingen. Als de stekker in het stopcontact wordt gestoken, zal “SHARP" in het display oplichten tot de eerste instellingen zijn gemaakt.
| BEELDSCHERMDISPLAY INSTELLEN (OSD: ON SCREEN DISPLAY , VAN _um * kies het videokanaal. Druk op de (OPERATIE) om de videorecorder in te schakelen Deze videorecorder kan VHF-kanalen 2 #mi2, kabelnetkanaien S1 tm S41 en UHFkanalen 21 t/m 6% ontvangen. Deze videorecorder heelt 48 programmeerbare [voorbeeld voerkeuzeposities waarop elk één van de bovenstaande kan worden vastgelegd. .
Aties ' Overstaan van kunt u de videorecorder instellen om niet 25 over te slaan, Aan de hand van de volgende voorgeprogrammeerde kanaalpe: VOORBEREIDING * Schakel de TV en videorecorder in, en kies het videokanaal op de TV. Annuleren van het overstaan van een kanaalpositie VOORBEREIDING ) * Schakel de TV er: videorecorder in, en kies het videokanaal HANDELING i tv-scherm tv-scherm HANDELING [Voorbeeld: Kanaalpositie 12 voor verslaan programmeren.
| BEELDSCHERMDISPLAY INSTELLEN (OSD: OR "WIJZIGEN VAN DE KLOKINSTELLING | HANDELING | @ Druk op de menutoets (MENU) @ Kies onderdeel! *3" (CLICK) dor op numerieke toets (3) te drukken. Het klokinstelscherm verschijnt en “24H" of “12H" knippert.
BASISBEDE Shuttle systeem Middels het Shuttle systeem kunt u alle vereiste basisfuncties op eenvoudige wijze met de shuttle ring bedienen. Tijdens de STOP functie {Snel doorspoelen, terugsnoeien) w o (7 (Terugspoelen) [ PLAY/ X2 (Snel doorspoelen) PAUSEN /STEL Snel Dooren terugspoelen ® Druk op de STOP !Osts. Draai de ring vervolgens naar rechts of rinks en laat daarna los. {De shuttle ring draait vanzelf weer naar de middenstand.) @ Druk op de STOP toets om het snel doorof terugspoelen le stoppen.
Weergave van cassettes met Hu-Fi geluidsopnamen Met deze videorecorder kunnen ook cassettes worden weergegeven waarop alleen videosignalen of Hu-Fi audiosignalen zijn opgenomen. OPMERKING: ‘ kunnen en via de audio-uitgangsaansiuitingen (AUDIO OUT) worden uitgestuurd. Geluid van de hoogtrekwentie-uitgangsaansluiting {RF OUT) zal uitsluitend mono NH Hel beeldscherm zal blauw zijn bij weergave van cassettes met alleen Hu-Fi audio-opnamen.
" OPNAME VAN Hu-FI STEREOGELUID | Met deze videorecorder kunt u automatisch audiosignalen op kwee audiosporen opnemen. Hu-Fi: Met gebruik van speciaal roterende koppen worden audiosignalen in het FM formaat op het videospoor opgenomen en mullig-soud uitzendingen (stereo of tweetalige programma’s) automatisch op twens kanalen opgenomen. Normaal: Audiosignalen worden mono op het lineaire spoor opgenomen.
TIMER-GESTUURDE OPNAM VOORBEREIDINGEN KD . Plaats een casselle waarvan de wispreventie-opening is bedekt. De F Um videorecorder zal automatisch aanschakelen. De timer kan worden ingesteld voor het Taken van automatische opnamen « Controleer of de Kok de juiste tijd toont. (Zie het gedeelte WIJZIGEN VAN van 8 programma's over een periode van 365 dagen. Daarnaast kan elk van DE KLOKINSTELLING ) de ingestelde programma’s ingesteld worden om dagelijks of wekelijks te .
TIMER-GESTUURDE OPNAME "CONTROLEREN VAN tierinstellingen | | ANNULEREN VAN tierinstellingen et beeldschermdisplay kan een overzicht van Alie gemaakte Volg de procedure hiema om reeds geprogrammeerde tierinstellingen te Met tierinstellingen op het Tv-scherm worden getoond ‘ wissen. VOORBEREIDING VOORBEREIDING Schakel de TV en videorecorder in en kies het videokanaal Schakel de TV en videorecorder in en kies het videokanaal op de TV.
| SPECIALE FUNCTIES Displaytoets (DISPLAY) .ol Wistosts {(CLEAR)— ingzoekicels P RESEARCH) T Herhaaltoets ¢ Nulptint-terugspoelicets {ZERE BACK) @) Kinderslottosts Toetsen digitaal fragmentzoeksysteem (DPSS) DIGITAAL FRAGMENTZOEKSYSTEEM (DPSS) | NULPUNT-TELLERGEHEUGENFUNKTIE Met deze funkiie kan een fragment van de cassette snel opgezocht worden. Deze functie maakt gebruik van indexsignalen om een bepaald gedeelte op de band op te zoeken en drama automahsch te beginnen met weergave.