User Manual

8
If problems persist contact the SHARP Helpline on tel: [phone]
INSTALLING YOUR VCR
INSTALLATION CONTINUED
The clock setting screen will now appear.
To set the time and date follow the steps
below:
1. Press the [ / ] menu select
buttons to select either 12 or 24 hour
clock operation.
2. Press [ / ] to select TIME. Enter
the time using the NUMBER
BUTTONS or the [ / ]
buttons. If the minutes or hours are
less than 10, enter the leading 0. If
using the 12 hour clock enter AM or
PM by pressing the
AM/PM
button on the remote control.
3. Press [ / ] to select DATE. Enter
the date using the NUMBER
BUTTONS or the [ / ]
buttons. For example, for 1st April
enter
01 04.
4. Press [ / ] to select YEAR. Enter
the last two digits of the year using
the
NUMBER BUTTONS or the
[ / ] buttons. For example, for
2000 enter
00. For the year 2001
enter 01.
5. Press the SET button to store the time
and date.
NOTE:
✔
All the programmes should now be correctly tuned in and the clock set.
• You will need to update the clock for Winter/Summer daylight saving.
12 hour example:
24 hour example:
CLOCK
MODE T I ME DAT E YEAR
24H 15:0501/0400
MODE : 2 4H / 12H
씱씰 : SELECT 쑿쑼 : CHANGE
SET : ENTER MENU : EX I T
CLOCK
MODE T I ME DATE YEAR
12H 03:05PM 01/04 00
MODE : 2 4H / 12H
씱씰 : SELECT 쑿쑼 : CHANGE
SET : ENTER MENU : EX I T
AM/PM