Operation Manual
17
Basic Operations
Basic Operations
Previewing
Previewing Images
The LCD monitor screen functions as a handy
preview monitor. Nothing needs to be con-
nected, allowing instant on-screen preview.
Previewing still images
1 Set the Mode Dial to “w”.
2 Press the Power button until the camera
turns on.
• The last image recorded on the card
displays in full screen.
E V
55 0 01/
2 . 5F
..EV
00
0 000
1/
2.5F
2448
]
Fine
[
0050
-
1000 0
3 Press j or k to select
the image.
• When holding down the
button, you can search
through the images on
the card. The search
can be very fast, so it is recommended
that you use the on-screen indicators.
Notes:
• Depending on the amount of data for the
recorded image, the picture quality icon
displayed during playback may not match the
picture quality setting used during recording.
• Images bigger than 2448K1632 pixels, e.g.
images recorded on other equipment, display as
thumbnails, not full screen.
• Images and capture details recorded with a
different camera may not display properly or not
display at all.
• Do not preview images on any card that has a
defective image (with noise and distortion)
created on other equipment. If you mistakenly
preview the images on such a card, turn the
power off, remove, and never use it with this
camera again.
(Continued to next page)
Mode dial
Power button
Operation button
DISPLAY button