Operation Manual

24
Useful Features Capturing
Useful Features
Selecting the Shooting Mode
Available in [, ], ;, ', , or . mode
This camera has five different modes for capturing images.
Types
SINGLE: Normal mode to capture a single
still image
CONTINUOUS: Captures three consecutive
still images
SELF TIMER: Captures a still image with
time-lag of 10 seconds
BRACKET: Captures three still images at
different exposure settings
z BRACKET: Captures three still images at
different gamma settings
1 Turn on the camera in the desired mode. 2 Press the MENU button until the menu
screen appears.
3 Press l or m to select “O ”, then press
the SET button.
4 Press l or m to select “SHOOTING
MODE”, then press the SET button.
5 Press l or m to select the desired
setting, then press the SET button.
6 Press the MENU button to turn off the
menu screen.
Notes: • Depending on your selection in step 5, perform
the steps in the sections indicated below.
- SINGLE: p. 13 - CONTINUOUS: See the following section. - SELF TIMER: p. 25 - BRACKET: p. 26 - z BRACKET: p. 27
• When the card capacity becomes nearly full in
step 5, the settings, CONTINUOUS, BRACKET and z BRACKET may not be selectable.
In CONTINUOUS mode 1 Press the Shutter button half-
way down to focus on the subject.
QU I CK SHOT
FRAME GUIDE
DIGITAL ZOOM
RETURN
IMAGE SI ZE IMAGE QUAL I TY
CAPTURE 1
SINGLE
CONT I NUOUS BRACKET SELF TIMER
BRACKET
SHOOTI NG MODE
SINGLE
CONT I NUOUS BRACKET SELF TIMER
BRACKET
SHOOT I NG MODE
2 Press the Shutter button fully to
capture the image. • The camera captures three
consecutive still images.
Notes: • In CONTINUOUS mode, the flash does not work. • If the card becomes full or the battery runs down
completely while shooting in continuous mode, the camera automatically stops image capture.