Service manual

ManualsBrandsSharp ManualsDigital CameraVE-CG40U

VE-CG30U

VE-CG40U

5-1-3. TEST 2: User mode settings

When finishing the service works, the camera must be set USER MODE again.

In order to set the camera back to USER MODE, execute TEST 2 as below.

Select the TEST 2 and press the SET key.

TEST MODE

BOOT VER xxxxx

IPL VER xxxxx

MAIN VER xxxxx

SUB VER xxxxx

USB SNUM xxxxxxxx

2 SET SHIPPING

ENTER : START

DEL : RETURN

2 SET SHIPPING

TEST MODE 2 screen After settng

[Operation]

· Press the SET key start to [User Mode settings].

· When completed, the screen below appears.

00XX

0000

COMPLETE

DEL RETURN

2 SET SHIPPING

· Press the power key to end the test mode.

5-1-4. TEST 3: White balance low color temp.

adjustment

Select the TEST 3 and press the SET key.

TEST 3,4,5,7,9,A and D are test modes for camera adjustment. See "5-2 Adjustment method" for detailed test

environment.

ENTER : START

DEL : RETURN

3 WB LOW TEMP

TEST MODE

BOOT VER xxxxx

IPL VER xxxxx

MAIN VER xxxxx

SUB VER xxxxx

USB SNUM xxxxxxxx

3 WB LOW TEMP

TEST MODE 3 screen After settng

[Operation]

· Press the SET key to start adjustment.

· When completed, the screen below appears.

00XX

0000

COMPLETE

DEL RETURN

3 WB LOW TEMP

· To select another test mode:

Press the DELETE key to return to the TEST MODE

initial screen.

· To end the test mode:

Press the POWER key to turn off the camera.

5-1-5. TEST 4: White balance high color temp.

adjustment

Select the TEST 4 and press the SET key.

ENTER : START

DEL : RETURN

4 WB HIGH TEMP

TEST MODE 4 screen After settng

[Operation]

· Press the SET key to start adjustment.

· When completed, the screen below appears.

00XX

0000

COMPLETE

DEL RETURN

4 WB HIGH TEMP

· To select another test mode:

Press the DELETE key to return to the TEST MODE

initial screen.

· To end the test mode:

Press the POWER key to turn off the camera.

TEST MODE

BOOT VER xxxxx

IPL VER xxxxx

MAIN VER xxxxx

SUB VER xxxxx

USB SNUM xxxxxxxx

4 WB HIGH TEMP

5-1-6. TEST 5: CCD pixel defect correction.

adjustment

Select the TEST 5 and press the SET key.

ENTER : START

DEL : RETURN

5 DEFECT WHT BLK

TEST MODE 5 screen After settng

[Operation]

· Press the SET key to start adjustment.

· When completed, the screen below appears.

· To select another test mode:

Press the DELETE key to return to the TEST MODE

initial screen.

· To end the test mode:

Press the POWER key to turn off the camera.

TEST MODE

BOOT VER xxxxx

IPL VER xxxxx

MAIN VER xxxxx

SUB VER xxxxx

USB SNUM xxxxxxxx

5 DEFECT WHT BLK

0XXX

COMPLETE

DEL RETURN

5 DEFECT WHT BLK