Specifications

VL-SD20S-GB/pp. 026-041; 99/7/28/18:00
G. K. Associates, Tokyo
Useful Features
36
Using Still Recording
1 In Recording Standby mode, press the
SNAP button.
• A still image of the subject is displayed.
2 Press the REC START/
STOP button.
• The still image of the
subject will be recorded.
In SNAP and PHOTO SHOT modes, the
VIEWCAM returns to Recording Standby
mode after recording a still image for
6␣ seconds.
SNAP/PHOTO SHOT
To pause recording, press the REC START/
STOP button.
To cancel the still image, press the SNAP
button in Recording Standby mode.
STILL
To pause recording, press the REC START/
STOP button.
To cancel the still image, press the SNAP
button.
Notes:
• SNAP and STILL can also be used during
recording by pressing the SNAP button.
• If PHOTO SHOT is used during recording, a
still picture will be recorded for 6 seconds
without the sound and visual effects of a
camera shutter closing.
• The picture quality in these modes will be slightly
lower than normal pictures.
Still Recording
You can record still images of subjects with
normal sound by selecting one of three still
recording modes.
Type of Still Recording Modes
SNAP: A still picture (snapshot) is recorded for
6 seconds.
STILL: A continuous still image is recorded.
PHOTO SHOT: A still picture is recorded for
6 seconds following␣ the sound and visual
effects of a camera shutter closing. (The
sound and visual effects are not recorded.)
Selecting Still Recording Mode
1 In Recording Standby mode, display the
menu screen (see page 25).
2 Toggle the CONTROL switch (Q) to
select “MULTI FRAME”, then press the
CONTROL switch (W) to select “1”.
3 Toggle the CONTROL switch (Q) to
select “PHOTO SNAP”, then press the
CONTROL switch (W) to select the
desired still recording mode.
SNAP button
EXIT
MULT I FRAME
PHOTO SNAP
1
SNAP
----------- 2 ----------
SET
ITLLS
TOOHOHTSP
ANPS
4Press the EXIT button (MODE DISPLAY)
to turn off the menu screen.
EXIT
EXTEND
DGTL ZOOM
FADE
MULT I FRAME
PHOTO SNAP
1
OFF
NORMAL
SNAP
SET
MENU
2
DIS ON