Specifications

VL-SD20S-GB/pp. 048-058; 99/7/28/18:00
G. K. Associates, Tokyo
Advanced Features
Advanced Features
Camera Recording
55
4 Toggle the CONTROL switch to adjust
the item to the desired setting.
Type of Backlight modes
(“BACKLIGHT”)
AUTO: The VIEWCAM automatically switches
between “NORMAL” and “BRIGHT”
depending on the ambient lighting. This
mode is only available in Camera mode.
NORMAL: For use indoors or under
moderate lighting conditions.
BRIGHT: For use outdoors under strong
lighting conditions, such as bright daylight.
5 Press the CONTROL switch to set the
picture/backlight setting.
6 Press the EXIT button (MODE DISPLAY)
to turn off the adjustment screen.
Notes:
• If you set the backlight (“BACKLIGHT”) to
“AUTO” in Camera mode and then set the
VIEWCAM to VCR mode, the backlight mode
automatically changes to “NORMAL”.
• When the colour is adjusted, the picture on the
screen may differ from the picture actually
recorded. Do not change the colour setting
unless it is necessary. (This adjustment only
affects the monitor picture, not the recorded
image.)
BACKL IGHT BRIGHT
BACKL IGHT
NORMAL
BACKL IGHT
AUTO
COLOUR
BRIGHT
Picture/Backlight
Adjustments
If the monitor picture is difficult to see due to
ambient lighting, etc., adjust the picture
settings. This feature can be adjusted in both
Camera and VCR modes.
• The example screens for this feature are for
Camera mode.
1 Press the CONTROL switch until
appears.
2 Press the PICTURE button ( ) to
display the adjustment screen.
3 Toggle the CONTROL switch (Q) to
select the item you wish to adjust, then
press the CONTROL switch (W).
EXIT
COLOUR
BRIGHT
BACKLIGHT AUTO
SET
PICTURE
TURE
PI C
-
Darker Brighter
Decrease Increase
EXIT
COLOUR
BRIGHT
BACKLIGHT AUTO
SET
PICTURE
BRIGHT
BACKLIGHT AUTO
PICTURE
Example