Specifications

VL-SD20S-GB/pp. 069-074; 99/7/28/18:00
G. K. Associates, Tokyo
Appendix
74
Demonstration Mode
You can watch a brief demonstration of the
special VIEWCAM features in Demo mode.
If the demonstration appears on the screen
when you turn on the VIEWCAM for the first
time, cancel the Demo mode to use your
VIEWCAM.
Note:
• The demonstration is only displayed in English.
Watching the Demonstration
1 Make sure that there is no video
cassette in the VIEWCAM.
• If a cassette is in the VIEWCAM, Demo
mode does not work. Perform the
procedure on page 11 to remove it.
2 Hold down the Lock
button and slide the
Power switch to
CAMERA.
3 Press the CONTROL switch until
appears.
4 Press the MENU button (C)
to display the menu screen.
MENU
5 Toggle the CONTROL switch (Q) to
select “DEMO MODE”, then press the
CONTROL switch (W) to select “ON”.
• The demonstration begins.
Cancelling Demo Mode
1 During the demonstration,
press the CONTROL switch.
2 Perform steps 3 and 4 above.
3 Toggle the CONTROL switch (Q) to
select “DEMO MODE”, then press the
CONTROL switch (W) to select “OFF”.
4 Press the EXIT button (MODE
DISPLAY) to turn off the menu screen.
Note:
• The demonstration will stop if you press the
CONTROL switch. If you leave it for 60 seconds,
or turn the power off temporarily and then set the
Power switch to CAMERA, the demonstration will
begin again.
EXIT
LANGUAGE
DEMO MODE
----------- 1 ----------
SET
MENU
ON
DIS
EXTEND
ON
2
REMOTE ON
EXIT
LANGUAGE
DEMO MODE
----------- 1 ----------
SET
MENU
OFF
DIS
EXTEND
ON
2
REMOTE ON
Operation buttons
Power switch
Lock button
EFF.
PIC.
MENU
AUTO
TURE
PIC
- SCENE
MENU
SP
CONTROL switch