Specifications

sharpVISION™ Camera
sharpVISION™ SDK Reference
72
6.3. Configuration VIs
6.3.1. Overview: Configuration VIs
Configuration VIs allow the user to read information from the camera, read configuration
parameters from the camera and write configuration parameters to the camera.
IDT Get Info: it reads information from the camera, such as camera model, firmware version,
sensor type, sensor model, etc. The info key is one of the input parameters.
IDT Setup: it sets the configuration parameters to the camera: contrast, brightness, exposure
time, binning and ROI.
IDT Get Param: it reads a specific parameter from the camera. The parameter key is one of
the input parameters.
IDT Set Param: it writes a specific parameter to the camera. The parameter key is one of the
input parameters.
IDT Trig Setup: it allows the user to configure the trigger mode.