Service manual

VL-E990E

VL-A10U/UC/UA/UW/T/K

VL-AH30U/UC/T

<11. Disassembly of the LCD panel>

(2)

Claw (A)

(1)

Light guide plate

Reflection sheet

Lugs

(3)

(C)

(4)

(2)

Claw (B)

Disengage the claw, and remove the

LCD panel.

Arm(E)

Arm(D)

FPC

Prism sheet

Diffusion sheet

1. Disengage two claws (A), and remove the lamp inverter unit (1) from the LCD holder (2).

2. Remove the sheets from the LCD holder (2).

3. Pull the LCD glass retaining (3).

4. Remove the FPC from Arm(D) and (E).

5. Disengage the claw (B), and slide the LCD panel (4) in the (C) direction to remove the LCD holder (2).

Note:

When handling the prism sheet, diffusion sheet, light guide plate, reflection sheet and reflection polarizing sheet do not touch any parts

other than lugs and sides.

Put the light guide plate and reflection sheet between reflectors of lamp. Therefore, install them together with the lamp ass'y.

Note:

When fixing the cassette compartment lid, first engage the claws

A and B, and then engage the claws C and D, verify that the four

claws (A, B, C and D) of the cassette compartment lid are

securely engaged as shown in the view above.

Claw C

Claw A

Claw B

Claw D

View E

View F