Manual

ManualExposure
The VIEWCAM is preset to Auto Exposure
mode, which automatically chooses the optimal
aperture. When there is too much contrast in
brightness between the subject and
background, however, you may not be able to
record a clear image. In this case, use the
manual exposure function to correct the
exposure level.
Background is too bright and subject too
dark (backlit subject).
• Increase the exposure level to allow more light
through the lens.
Subject is too bright against background.
• Decrease the exposure level to allow less light
through the lens.
2
In Recording Standby mode, press the
MENU button until _4 appears.
MEN [ 1
_m WHITE EXPO
IEOcuslIBALIBURE
@®@®®
Press the EXPOSURE button (11)to
display the exposure setting screen.
IEXPO J
SURE
II .....
EXPOSURE
,IIIIIDDDDDA
v IA IAUTOIExITI
3
Press the _" or A button to select the
desired exposure level.
• Tile bar indicates tile selected exposure
level.
_i) II .....
_r _I_ AUTO EXIT
EXPOSURE I
,llllllDDDDi
Less/_ht _ Mo_/_ht
4 Press the EXIT button ( • ) to turn off
the exposure setting screen.
To cancel Manual Exposure mode
Perform steps 1 and 2 above, then press the
AUTO button (_).
Notes:
• The Manual Exposure mode will be canceled if
the power source is interrupted.
• The Manual Exposure mode will be canceled
if a scene setting is selected thereafter.
ili'i iii ii !i!iiiiii ii ii!i !ii!ii!!i!!i!ii!!i!iii!i
46