Technical information

Using the Mwave DSP Telephony Features
Mwave Telephone Answering Machine
Note:
When you use the telephone
answering machine function, refer to
the manual that came with the
application program package.
The Mwave telephony features allow you to use the computer as a
telephone answering machine as follows:
Record greetings and messages through the microphone
Play back greetings and messages through the speaker or
headphones
Play back greetings and messages to a remote telephone with
password
Use a full-duplex speaker phone with the microphone and
speaker
Record multiple greetings
Log both incoming and outgoing phone calls
Start recording your greeting after being alerted by a beep
Alert your caller with a beep to start recording a message
Place the phone on or off hook and dial phone numbers
Redial from the message log and from the keyboard
Use both tone (DTMF) and pulse dialing from the keyboard
Maintain a log of incoming and outgoing phone calls and
messages
Use voice compression to minimize disk space for stored
greetings and messages
Use a Windows MCI Telephony application program interface
Use a high-performance DMA interface
Speed up or slow down played messages without affecting their
pitch (TDHS)
Detect DTMF digits received from the phone line
90 IBM ThinkPad 755CX User's Guide