Technical information

Installing the PCMCIA Device Driver
Installing the PCMCIA Device Driver
Note:
Do not install the Phoenix**
PCMCIA support for IBM DOS 7.0.
PC Card Director for Windows runs
only in Enhanced mode of Windows
3.11 or later.
When installing an operating system, you must install the following
device drivers and software associated with PCMCIA before you
can use the PC Cards:
Card Services
Socket Services
Resource map utility
Power management utility
PC Card Director
PC Card client device drivers (only when PC Card Director does
not support the PC Card)
Use the following tables to determine the appropriate installation
instructions for the different operating systems.
For IBM OS/2 V.2.11:
Software File Name How to Install
Card Services PCMCIA.SYS Go to “Installing the
PCMCIA Device
Driver” for
installation.
Socket Services IBM2SS01.SYS
Resource Map Utility ICRMU01.SYS
Power Management
Utility
$ICPMOS2.SYS
PC Card Director EZPLAY2.DLL
EZPLAY2.HLP
AUTODRV2.SYS
AUTODRV2.INI
PC Card Client
device drivers
Varies among PC
Cards.
Refer to the manual
that came with the
PC Card.
Chapter 7. Installing Software 183