Technical information

Installing the PCMCIA Device Driver
OS/2
Installing for OS/2
To install the PCMCIA device driver for OS/2, do the following:
1 Turn on the computer and start the operating system.
2 Insert the PCMCIA Features Diskette into the diskette
drive.
3 Open the OS/2 full screen command prompt; then type
A:PCMINST2 and press Enter.
4 Follow the instructions on the screen.
Note:
To restart the system:
1. Move the cursor to a blank part
of your OS/2 Desktop.
2. Press the right button of your
TrackPoint III or mouse.
3. Select Shut down.
5 After the installation has been successfully completed,
close all applications, remove the PCMCIA Features
Diskette from the diskette drive, and restart the system.
Note:
Whenever you update the
CONFIG.SYS file, refer to “Software
Considerations for OS/2” on
page 234.
You have completed the installation of the PCMCIA device driver for
OS/2.
Go to “Installing the ThinkPad Display Driver” on page 188.
Chapter 7. Installing Software 185