Technical information

Installing the ThinkPad Display Driver
Note:
To shut down OS/2:
1. Move the mouse pointer to a
blank part of your OS/2
Desktop.
2. Press the right button of your
TrackPoint III or mouse.
3. Select Shut down.
5 Remove the diskette from the diskette drive and shut
down OS/2; then restart the system.
6 Open the OS/2 full screen, type DSPINSTL; then press
Enter.
7 Follow the instructions on the screen.
When you are asked to enter the source directory, do the
following:
– If OS/2 has been preinstalled on your computer, use
the default directory on the screen. Do not change it.
– If OS/2 has not been preinstalled, enter A:\.
When you are asked to select the display type, select
Primary Display; then select Western Digital**
WD90C24, C24A on ThinkPad for the LCD of the
computer.
When you are asked to select the monitor configuration,
select Install Using Defaults for Monitor Type and
follow the instruction.
When you are asked to overwrite the target file, select
Yes.
8 After the installation has been successfully completed,
remove the diskette; then shut down OS/2 and restart
the computer.
You have completed the installation of the display driver for OS/2.
190 IBM ThinkPad 755CX User's Guide